Pyle PWD901 Manual

Pyle Alarmsystem PWD901

Læs gratis den danske manual til Pyle PWD901 (24 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Pyle PWD901, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

STANDARD FEATURES

Some of the system’s standard features include:

• 4-button remote transmitter

• LED Status indicator

• Valet/Override switch

• Extended Range Receiver

• 125dB Multi-tone siren

• Dual stage impact detector

• Remote panic

• Remote Valet mode

• Remote chirp delete

• Remote sensor bypass

• Passive or active arming

• Flashing parking lights

• Auto Rearming

OPTIONAL FEATURES

This system has many optional features that

may require additional parts and/or labor.

Please contact your dealer for more details.

• Remote keyless entry (door lock/unlock)

• Illuminated entry

• LCD 2-way Remote

• Hood & trunk protection

• Trunk/hatch release

• Window roll-up

• Additional sensors

• Remote Start (optional plug-in module)

• Stop & Go Feature

• Auto Cold Start

Note: Some features may not be appropriate

for certain vehicles.

REMOTE TRANSMITTER BUTTONS

NOTE: Transmitter cosmetics may differ

between models and between standard 1-way

and LCD 2-way transmitters, but button

functions remain the same as described below.

Each transmitter button has two operating

modes: standard and level shifted. Pressing a

transmitter button for less than one second

activates the standard function associated with

that button (such as arm or disarm). Pressing a

button for more than one second changes the

color of the standard transmitter’s LED to

green and activates the level shift feature.

While the LED is green (level shifted), pressing

any transmitter button accesses another level

of commands providing expanded operation.

Transmitter Icons

Button 1 Button 2

Button 3 Button 4

SYSTEM MANUAL

VEHICLE SECURITY SYSTEM

Optional Remote Start Module and 2-way Transmitter Instructions Included

ARMING OPERATION

To arm the system press transmitter button 1:

• The siren will chirp once.

• The parking lights will ﬂash once.

• The doors will lock.*

• The LED will turn solid for 10 seconds

then start flashing slowly. After 10

seconds the system is armed.

During Arming, if the hood or trunk is open or

the brake pedal is pressed, the system will wait

10 seconds for the zone to close. If a door is

open the system will wait up to 60 seconds for

the zone to close (depending on door zone

setting during installation). If a zone remains

open after the wait period, the siren will chirp

and the parking lights will ﬂash 4 times to

indicate the zone is still open. That zone will be

ignored, but keep all other areas remain

protected.

While Armed, the system will trigger if:

• The door, hood, or trunk is opened.

• The brake pedal is pressed.

• The shock sensor detects an impact.

• An optional sensor is disturbed.

When triggered by the door or hood/trunk

input the siren will sound or the horn will honk,

and the parking lights will ﬂash for 30 seconds.

If triggered by a sensor, the alarm cycle will last

15 seconds. If the alarm is triggered while the

optional remote start is engaged, the remote

start will immediately shut down.

If a zone triggers the system 3 times during a

single arming cycle, the system will bypass that

zone, keeping the other zones protected, until

the next time the system is armed.

If the shock sensor detects a light impact to the

vehicle or an optional sensor is disturbed, the

system will chirp and the parking lights will ﬂash

5 times to warn away the potential intruder.

*Optional Feature

PASSIVE ARMING OPERATION

The passive arming feature allows the system to

arm automatically without user intervention.

This feature can be toggled on/oﬀ using the

transmitter.

To turn passive arming on/off:

1. Press and hold button 2 for level shift.

2. Press button 4.

• The system will enter passive arming

operation mode.

• The optional 2-way LCD transmitter

display will show “LAST DOOR ARM”.

To arm the system passively:

1. Turn the ignition key oﬀ.

2. Exit the vehicle and close all doors.

• The siren will chirp and parking lights

will flash once after closing the last door.

• The LED ﬂashes rapidly indicating that

the system is preparing to arm. (The

system can be armed at any time by

pressing transmitter button 1.) NOTE:

Opening the hood/trunk or a door

resets the passive arming timer.

• After 30 seconds the siren will chirp to

indicate the system is armed.

• The parking lights will ﬂash once.

• The doors will lock.†*

†If Passive Locking was enabled during installation.

DISARMING OPERATION

To disarm the system press transmitter button 2.

• The siren will chirp twice.¥

• The parking lights will flash twice.¥

• The doors will unlock.*

• The dome light will turn on.*

¥If the alarm was triggered while away, the system will respond

with 3 chirps and 4 parking light flashes.

*Optional Feature.

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Alarmsystem
Model:	PWD901

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PWD901 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Alarmsystem Pyle Manualer

Pyle AZPLMCWD75 Manual

27 Juli 2024

Pyle PWD206 Manual

24 Juli 2024

Pyle PWD901 Manual

18 Juli 2024

Pyle PWD501 Manual

1 Juni 2023

Alarmsystem Manualer

Nyeste Alarmsystem Manualer

Hikvision DS-PM2-D Manual

28 Juli 2025

Hikvision DS-PDCO-E-WE Manual

27 Juli 2025

Hikvision DS-PDHT-E-WE Manual

27 Juli 2025

Hikvision DS-PDSMK-E-WE Manual

27 Juli 2025

Hager S791-22X Manual

23 Juli 2025

SimpliSafe KT043 Manual

22 Juli 2025

Hager LCA01U Manual

21 Juli 2025

Hager S165-22X Manual

21 Juli 2025

Hager S230-22X Manual

21 Juli 2025

Hager LCB01X Manual

21 Juli 2025