Qazqa 89439 Manual

Qazqa Lettelse 89439

Læs gratis den danske manual til Qazqa 89439 (2 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Qazqa 89439, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Motion CL II 20W LED Alu

MODEL: 89439

We are delighted that you have purchased this MICROWAVE Light.

This light is suitable for indoor use only. Please read this instrucon

manual before installaon and retain for future reference.

IMPORTANT: Never modify the unit, there are no user serviceable

parts inside. Not suitable for use with dimmer switches. Install in

accordance with IEC Wiring Regulaons.

THE LIGHT SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN.

POSITIONING THE LIGHT

When selecng the mounng posion, take into account the follo-

wing points:

1. The sensor is designed for opmum performance when mounted

at a height of above 2.5 to 4 meters (see Figure )

2. Avoid poinng at or posioning close to heat sources such as

heaters or heat extracon units, which may cause false triggering.

3. Avoid poinng at bright lights as the sensor will not funcon when

you set Lux control level to dark.

4. Avoid mounng at strong electromagnec disturbance, i.e. near

electrical motor or ﬂuorescent lamp ballast.

LUX

<200LUX

<60LUX

<20LUX

<5LUX

SENS

3.5 m

TIME

10s

1min

4min

10min

1=ON 0=OFF x=ON or OFF

INSTALLING THE LIGHT

Before commencing any electrical work, ensure the mains supply is

isolated by switching oﬀ and removing the relevant fuse. (See Figure )

1. Remove the Glass Chimney

2. Use the back metal disk to mark the posion of screw onto ceiling

surface. Using a bit, drill the wall to a depth of about 3cm. Fit the

rawl-plugs supplied.

3. Bring mains wiring through and ﬁx back metal disk to ceiling

surface using screws. Connect mains wiring to the terminal block.

4. Re-ﬁt the Glass Chimney

Aer ﬁnishing the installaon operaon, you can adjust the working

state of the MICROWAVE SENSOR

TECHNICAL DETAILS:

Voltage: 220-240 V~ 50 Hz

Waage: 40×0.5W LED

Detecon range: 360° and Max.5meters radius (see Figure )

Delay me: 10s to 10 min. adjustable

Lux control level: Daylight to Night adjustable

IP: 20

214

Ø324 mm

74 mm

Produkt Specifikationer

Mærke:	Qazqa
Kategori:	Lettelse
Model:	89439

Har du brug for hjælp?

Hvis du har brug for hjælp til Qazqa 89439 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lettelse Qazqa Manualer

30 December 2025

24 August 2024

24 August 2024

23 August 2024

Qazqa RLX-1201 Infrared Sensor Instruction Manual

23 August 2024

23 August 2024

23 August 2024

23 August 2024

23 August 2024

23 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Dainolite V166-1W Manual

5 April 2025

Dainolite OFE-161P Manual

5 April 2025

Dainolite DMLED10-A-5D Manual

5 April 2025

Dainolite DM1958F Manual

5 April 2025

NUVO Ballerina 60/1265 Manual

4 April 2025

NUVO SF77/196 Manual

4 April 2025

NUVO Ballerina 60/329 Manual

4 April 2025

NUVO Cordello 60/7883 Manual

4 April 2025

NUVO Destin 60/7706 Manual

4 April 2025

NUVO Livingston 60/7669 Manual

4 April 2025