Qazqa 90496 Manual

Qazqa Lettelse 90496

Læs gratis den danske manual til Qazqa 90496 (2 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Qazqa 90496, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

INSTRUCTION MANUAL

Motion IV CL 20W LED

90496

POSITIONING THE LAMP

When selecting the mounting position, take into account the following points:

1. The sensor is designed for optimum performance when mounted at a height of above 2.5

to 4 meters (see Figure )

2. Avoid pointing at or positioning close to heat sources such as heaters or heat extraction

units, which may cause false triggering.

3. Avoid pointing at bright lights as the sensor will not function when you set Lux control

level to dark

4. Avoid mounting at strong electromagnetic disturbance, i.e. near electrical motor or

uorescent lamp ballast.

We are delighted that you have purchased this

MICROWAVE lamp. Please read this instruction manual

before installation and retain for future reference.

IMPORTANT: Never modify the unit, there are no user

serviceable parts inside. Not suitable for use with dimmer

switches. Install in accordance with IEC Wiring Regulations.

THE LIGHT SHOULD BE INSTALLED BY A QUALIFIED

ELECTRICIAN.

INSTALLING THE LAMP

Before commencing any electrical work, ensure the mains supply is isolated by switching off

and removing the relevant fuse. (See Figure 2)

1. Remove the Glass Chimney

2. Use the back metal disk to mark the position of screw onto ceiling surface. Using a bit,

drill the wall to a depth of about 3cm. Fit the rawl-plugs supplied.

LUX

<200LUX

<60LUX

<20LUX

<5LUX

SENS

4.5m

1.5m

TIME

10s

1min

4min

10min

1=ON 0=OFF x=ON or OFF

3. Bring mains wiring through and x back metal disk to ceiling surface using screws.

Connect mains wiring to the terminal block.

4. Re-t the Glass Chimney

After nishing the installation operation, you can adjust the working state of the

MICROWAVE SENSOR.

TECHNICAL DETAILS:

Voltage: 220-240 V~ 50/60 Hz

Wattage: 40×0.5W LED

Detection range: 360° and Max.6meters radius (see Figure )

Delay time: 10s to 10 min. adjustable

Lux control level: Daylight to Night adjustable

IP: 44

6x27mm

OFF

4x30mm

3x 3x

300 mm

108mm

φ6mm

30mm

214

7 8

360

3-4m

Max.6m 0Max.6m

360

Max.6m

Ø300 mm

Produkt Specifikationer

Mærke:	Qazqa
Kategori:	Lettelse
Model:	90496

Har du brug for hjælp?

Hvis du har brug for hjælp til Qazqa 90496 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lettelse Qazqa Manualer

30 December 2025

24 August 2024

24 August 2024

23 August 2024

Qazqa RLX-1201 Infrared Sensor Instruction Manual

23 August 2024

23 August 2024

23 August 2024

23 August 2024

23 August 2024

23 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Dainolite V166-1W Manual

5 April 2025

Dainolite OFE-161P Manual

5 April 2025

Dainolite DMLED10-A-5D Manual

5 April 2025

Dainolite DM1958F Manual

5 April 2025

NUVO Ballerina 60/1265 Manual

4 April 2025

NUVO SF77/196 Manual

4 April 2025

NUVO Ballerina 60/329 Manual

4 April 2025

NUVO Cordello 60/7883 Manual

4 April 2025

NUVO Destin 60/7706 Manual

4 April 2025

NUVO Livingston 60/7669 Manual

4 April 2025