Stagg KBA 40 Manual

Stagg Modtager KBA 40

Læs gratis den danske manual til Stagg KBA 40 (2 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Stagg KBA 40, eller vil du spørge andre brugere om produktet?

Side 1/2
BACK PANEL:
WARNING: This amplier must be earthed. Please check that the supply voltage details given on the
rating label (located on the rear panel) are in accordance with your electricity supply.
1POWERSWITCH: This switch turns the amplier on or off.
2MAINSINPUT: This is the input socket into which the mains power cable must be connected. This
amplier is supplied with a power cable with a moulded-on plug. If the socket outlets in the home are not
suitable for this plug, use an appropriate plug adapter that can handle the power required for the amplier.
3POWERFUSE: In the event of the power fuse having to be replaced, rst unplug the power cable from
the mains outlet. Then remove the fuse cover and replace the power fuse with another fuse of the same
type and value. Never plug the power cable back into the mains outlet without the fuse cover. If the power
fuse blows up again when powering on the amplier, take the apparatus to a suitable service centre for
repair.
4CD/MP3INPUT: This is a line level 1/8” 3.5 mm) mini stereo jack into which an MP3/CD/Tape
player may be connected.
5LINEOUT: This 1/4” 6.3 mm) mono jack output can be connected directly to a mixing desk or a
more powerful amplifying system.
6HEADPHONES: This is a 1/4” 6.3 mm) standard jack output to connect the headphones. When
headphones are connected, no sound is produced from the speaker.
7INSTRUMENTINPUT: Plug your keyboard in here, using the Left and Right 1/4” 6.3 mm) jack
inputs for stereo sound sources, or the Left input alone for mono sound sources. We recommend that
you always use high-quality shielded cables to prevent any background noise interference or unwanted
feedback.
8MICINPUT(XLR): Here you can plug in a microphone, using an XLR cable.
FeaturesandSpecicationsaresubjecttochangewithoutnotice.
FRONT PANEL:
1 MICVOLUME: This control determines the output volume for the microphone channel.
2 MICREVERB: Use this regulate to dose the amount of reverb effect you want on the microphone.
3 INSTRUMENTGAIN: This control determines the gain level for the keyboard channel.
4 INSTRUMENTCOMPRESSION: This control reduces the dynamic range of the output signal and
evens out the changes in volume that occur according to how hard you play your keyboard. Adding
compression will make your keyboard sound smoother and clearer.
5 TREBLE:This control determines the level of high frequencies in the output signal. Adding treble will
make the keyboard sound brighter and sharper.
6 MIDDLE: This control determines the level of middle frequencies in the output signal. Adding mid will
make your keyboard sound rounder and fuller.
7 PARAMETRICMIDDLE: Parametric mid is a more sophisticated way of boosting or cutting middle
frequencies. In a traditional EQ, the frequency area that is boosted or cut is xed. With a parametric mid
EQ, this frequency area is adjustable from mid low to mid high. Use this knob to select the required range
of middles, then use knob # 6. to determine the level of the selected range of mid frequencies.
8 BASS: This control determines the level of low frequencies in the output signal. Adding bass will make
your keyboard sound warmer and heavier.
9 MASTER: This control determines the overall volume of the amplier.
10POWERLED: Is lit up when the amplier is switched on.
2 3
USER’S MANUALSUSER’S MANUAL KBA 40 KBA 40
1
1
2
3
4 5
2
6 7 8
3 4 5 6 7 8 9 10
TECHNICAL SPECIFICATIONS
Max.RatedPower/Loudspeaker 40W RMS @ 8Ω load / 8” Woofer w/ Coaxial Tweeter
FrequencyResponse 45Hz to 15kHz
TotalHarmonicDistortion ≤ 0.8%
SignaltoNoiseRatio - 58dB (@ max. Rated Power)
InputImpedance 240Ω (Mic) / 30kΩ (Instrument)
PowerConsumption 70W max
MaximumInputLevel(VoltsRMS) 12mV (Mic) / 35mV (Instrument)
MaximumGain 65dB (Mic) / 68dB (Instrument)
Dimensions(HxWxD) 38 x 37 x 26cm / 15 x 14.6 x 10.2in.
Weight 12.4kg / 27.3lb


Produkt Specifikationer

Mærke: Stagg
Kategori: Modtager
Model: KBA 40

Har du brug for hjælp?

Hvis du har brug for hjælp til Stagg KBA 40 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Modtager Stagg Manualer

Stagg

Stagg KBA 40 Manual

24 Juni 2025
Stagg

Stagg ADBA 40 Manual

2 Juni 2025

Modtager Manualer

Nyeste Modtager Manualer

Kramer

Kramer WP-DEC7 Manual

17 Oktober 2025
FBT

FBT MXA 3120 Manual

17 Oktober 2025
Rotel

Rotel C8 Manual

15 Oktober 2025
Rotel

Rotel RA-11 Manual

15 Oktober 2025
Rotel

Rotel A10 MKII Manual

15 Oktober 2025
Ecler

Ecler GPA2-800 Manual

15 Oktober 2025
Axiom

Axiom ADA-1000 Manual

14 Oktober 2025
Kenwood

Kenwood DMX1058XR Manual

14 Oktober 2025