Tripp Lite CSDXB32USB Manual

Tripp Lite Batterioplader CSDXB32USB

Læs gratis den danske manual til Tripp Lite CSDXB32USB (52 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Tripp Lite CSDXB32USB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/52

Table of Contents

1. Important Safety Instructions 2

2. Overview 3

3. Feature Identication 4

4. Setup 5

4.1 Powering the USB Charger/Hub Unit 5

4.2 Door Locks 5

5. 32-Port USB Charger/Hub 6

5.1 USB Charger/Hub Features 6

5.2 Connecting Smartphones 6

to the USB Charger/Hub

5.3 Connecting a Computer to the 6

USB Charger/Hub

6. Wall Mounting 7

7. Desktop Placement 8

8. Specications 9

9. Storage, Service and Cleaning 10

10. Warranty and Product Registration 10

Español 11

Français

Русский

Deutsch

32-Port USB Charging Station

for Smartphones

Models: CSD32USB, CSDXB32USB, CSDXS32USB

(Series number: AG-0737)

Owner’s Manual

TrippLite.Eaton.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

1. Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product described

in this manual. Failure to comply may invalidate the warranty and cause property damage or personal injury.

USB Charger/Hub Unit:

• Connect the unit to an outlet that is in accordance with your local building codes and adequately protected against excess current,

short-circuits and earthly faults.

• The electrical outlet supplying power to the equipment should be installed near the unit and be easily accessible.

• The AC plug on the power supply cord serves as the disconnect device.

• Connect the unit directly to a properly grounded AC power outlet.

• Do not modify the plug, and do not use an adapter that would eliminate the ground connection.

• If any of the following situations arise, schedule an appointment with a service technician to have your equipment inspected:

• The equipment has been exposed to moisture

• The equipment has been dropped and damaged

• The equipment shows obvious signs of breakage

• The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s Manual

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of

the life support equipment or to significantly affect its safety or effectiveness is not recommended.

Charging Station Cabinet:

• Keep the charging station in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and

gasses, conductive contaminants, dust and direct sunlight.

• Leave adequate space around the charging station for proper ventilation. Do not block, cover or insert objects into the charging

station’s external ventilation openings.

• For best performance, keep indoor temperature between 32°F and 86°F (0°C and 30°C).

• Do not remove any warnings, cautions or descriptive labels from the charging cart.

• The charging station is extremely heavy. Use caution when handling the charging station. Do not attempt to unpack or mount it

unassisted. Use a mechanical device such as a forklift or pallet jack to move the charging station in the shipping container.

• Do not place containers of liquid or stack items on the cabinet.

• Inspect the shipping container and the charging station for shipping damage. Do not use the charging station if it is damaged.

• Use caution when cutting packing materials. The charging station could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the charging station cabinet or equipment without the original

packing materials may cause product damage that will void the warranty.

For Wall-Mount and Desktop Installations:

• The charging station must be installed by a qualified technician.

• Before mounting, first make sure that the wall surface can safely support the combined load of the charging station, equipment

stored and all attached hardware and components.

• The charging station can support equipment up to its maximum load capacity of 180 lb. (81.6 kg).

• Always use suitable mounting means when installing to cinder blocks, concrete, drywall or wood studs. Install securely to the wall

using proper hardware (not provided).

WARNING: The supporting surface must be able to safely support the combined load of the charging station, equipment stored and all

attached hardware and components (see 8. Specifications for more information on your model’s weight and dimensions).

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Batterioplader
Model:	CSDXB32USB

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite CSDXB32USB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Batterioplader Tripp Lite Manualer

Tripp Lite CSCXB16USB Manual

8 September 2025

Tripp Lite CSDXB32USB Manual

8 September 2025

Tripp Lite PR3/UL Manual

31 Juli 2025

Tripp Lite U280-Q01FL-BK-2 Manual

31 Juli 2025

Tripp Lite HCINT150SL Manual

30 Juli 2025

Tripp Lite UBC41 Manual

4 September 2023

Batterioplader Manualer

Nyeste Batterioplader Manualer

DeWalt DWST08050 Manual

8 September 2025

DeWalt DWST83472 Manual

8 September 2025

Emko Gencharger-312S Manual

8 September 2025

APA 16649 Manual

8 September 2025

DeWalt DCB104 Manual

8 September 2025

Makita DC1002 Manual

7 September 2025

Emko Gencharger-512S Manual

7 September 2025

DeWalt DCB1102 Manual

4 September 2025

DeWalt DXMA1410476E Manual

4 September 2025

AEG LT60 Manual

3 September 2025