ART Tube MP Studio V3 Manual

ART Modtager Tube MP Studio V3

Læs gratis den danske manual til ART Tube MP Studio V3 (16 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20 anmeldelser. Har du et spørgsmål om ART Tube MP Studio V3, eller vil du spørge andre brugere om produktet?

Side 1/16
Tube MP
Tube MP
Tube MP
Tube MPTube MP Studio V
Studio V
Studio V
Studio V Studio V3
3
3
33
Voiced Valve Preamplifier w/Output Protection Limiting
USER’S MANUAL
I
IMPORTANT SAFETY INSTRUCTIONS – READ FIRST
This symbol, wherever it appears, This symbol, wherever it appears, alerts
alerts you to the presence of uninsulated you to important operating and maintenance
Dangerous voltage inside the enclosure. Voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Please read manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user guide.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Only connect the unit to mains power of the type marked on the rear panel.
Power cord:
Use the power cord with sealed mains plug appropriate for your local mains supply as provided with the
equipment. If the provided plug does not fit into your outlet consult your service agent. Route the power cord so
that it is not likely to be walked on, stretched or pinched by items placed upon or against.
Ventilation:
Do not position the unit where the air required for ventilation is impeded. If the unit is to be wall mounted with a
100mm vesa mounting system, ensure that it is constructed to allow adequate ventilation.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to rain, moisture or use in damp or wet
conditions. Do not place a container of liquid on it, which may spill into any openings.
Heat:
Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire hazard.
Locate the unit away from any equipment, which produces heat such as: power supplies, power amplifiers and
heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke machines.
Handling:
To prevent damage to the cosmetics, avoid rough handling or placing the front or rear face on an abrasive
surface. Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To
avoid injury to yourself or damage to the equipment take care when lifting, moving or carrying the unit.
Servicing:
Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, or
the power cord or plug becomes damaged, during a lightning storm or if smoke odor or noise is noted. Refer
servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user manual.


Produkt Specifikationer

Mærke: ART
Kategori: Modtager
Model: Tube MP Studio V3

Har du brug for hjælp?

Hvis du har brug for hjælp til ART Tube MP Studio V3 stil et spørgsmål nedenfor, og andre brugere vil svare dig