Bellari PP532 Manual


Læs gratis den danske manual til Bellari PP532 (2 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Bellari PP532, eller vil du spørge andre brugere om produktet?

Side 1/2
PP532 Passive Preamp
SPECIFICATIONS:
IN Connectors: 4 - RCA, 1 - 1/8" TRS Stereo
OUT Connectors: RCA
Size: 5.5"w x 3.1"d x 1.6"h
Passive design, NO power, NO electronics and NO distortion.
Thick steel chassis with red powder coating.
Four pairs of inputs and one pair of outputs with gold plated RCA jacks.
High quality Bosin potentiometer used for precise volume adjustment.
Bellari is a division of Rolls Corporation
Salt Lake City, UT
6/18
OUT
PP532
MADE IN USA
1
2
3
4
Passive Preamplifier
PP532
MADE IN USA
Volume
1
2
3
4
IN 4
What's in the box?
1 - Made in USA PP532
1 - This owners manual
1 - Lots of foam to keep all items safe, and scratch free
0 - power supply (its an all passive unit)
More and more audiophiles and DIY audio enthusiasts are
discovering the benets of passive preamps. Why? Because
more often than not, a passive preamp does the essential
job of a preamp (input switching and controlling volume)
while doing the least amount of harm to the audio signal.
Passive Preamplifier
PP532
MADE IN USA
Volume
1
2
3
4
IN 4
OUT
PP532
MADE IN USA
1
2
3
4
Thank you for purchasing the PP532. We hope you enjoy
using the PP532, and that it makes listening to your music
collection rewarding. We sincerely appreciate the opportunity
to build a product for you and participate in your love of qual-
ity music and sound. We love what we do and we’re happy
to help. All Bellari products are hand built in Salt Lake City,
Utah by people who care about high quality music.
The PP532 pre amplier is a completely passive design with
absolutely nothing added to your audio signal path.
That means NO power required, NO electronics used and
NO distortion will ever be added to your music.
It is the most e󰀨ective way to reach high-end audio quality,
and you will save enough coin that you can buy the more
expensive speakers you have been eyeing.
The chassis is made from .090 steel, meaning it is 3 times
thicker than most chassis. Four pairs of RCA inputs allow for
connection to all your music sources, and one pair of RCA
jacks to go to your amplier.
All this and it is 100% Handcrafted in Salt Lake City, UT.
The audiophile in you will approve of the 0% distortion added
and 100% original signal preservation, but the cheapskate in
you will use the savings to buy more gear, of course.
Connection of the PP532 is easy. The rear pannel 1-4 RCA's
connect your input signals. The OUT RCA on the rear pannel
goes to your amplier or other device. Volume knob sets the
level of the selected signal via the 1-4 front panel switch.
The IN 4 on the front is a 3.5mm (1/8") stereo input in parel-
lel with RCA input #4 on the rear of the unit. It is a great way
to plug your phone into your system without needing accesss
to the back of the unit.


Produkt Specifikationer

Mærke: Bellari
Kategori: Modtager
Model: PP532

Har du brug for hjælp?

Hvis du har brug for hjælp til Bellari PP532 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Modtager Bellari Manualer

Bellari

Bellari PP532 Manual

24 August 2025
Bellari

Bellari HA540 MK2 Manual

3 September 2024
Bellari

Bellari PA555 Manual

3 September 2024
Bellari

Bellari PA253 Manual

3 September 2024
Bellari

Bellari PA550 Manual

3 September 2024

Modtager Manualer

Nyeste Modtager Manualer