Crelando IAN 073860 Manual

Crelando Ikke kategoriseret IAN 073860

Læs gratis den danske manual til Crelando IAN 073860 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Crelando IAN 073860, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Intended use:

The Rhinestone Setter is intended exclusively for use in dry interior

areas. The Rhinestone Setter is an electric heating tool for fixing

rhinestones onto paper, textile, suede, leather, wood, cork and other

materials by means of heated metal tips. The Rhinestone Setter is

suitable for thermo-glue-coated rhinestones rivets, halves of pearls and

shaped stones. These stones and pearls are provided with a thermo

glue coat on the back side. The glue starts to liquefy already from

approximately 120°C and hence makes the connection between the

material and the stone possible. Any other use is not permitted. Such

use can lead to injuries (burns) of the user and damages of the material.

In these cases, the manufacturer carries no liability.

Safety instructions:

 CAUTION! When not in use, this Rhinestone Setter must be placed

on the security stand (picture VIII).

 When the device is placed on the stand, the surface underneath must

be firm, not flammable and horizontal.

 This appliance is not intended for use by persons (including children)

with restricted physical, sensory or intellectual abilities or lacking

experience and/or lacking knowledge unless they are supervised by

a person responsible for their safety or they receive instructions on

how to use the appliance.

 Children should be supervised in order to ensure that they do not play

with the appliance.

 In order to avoid hazards, if the mains connection of this appliance is

damaged, it must be replaced by the manufacturer or his customer

service or a similarly qualified person.

 A fire can break out if the appliance is not handled carefully.

 Ensure that the connecting cable does not come into contact with

heat, oil or sharp edges. Damaged connecting cables can cause fires,

short-circuits and electric shocks.

 Before use, remove combustible objects, liquids and gases from the

working area of the appliance. Keep your working area clean in order

to prevent accidents.

 Before use, check that the tool tip is correctly attached to the appliance.

The hot tips and their receptacles must not be brought into contact

with skin, hair, etc. Risk of burns.

 After use, place the Rhinestone Setter on the stand and allow it to

cool down before packing it away.

 As long as it is in use, do not leave the appliance unsupervised.

 Do not emerge the appliance into water and do not expose it to

moisture. Risk of electric shock!

 When the appliance is not in use, store it in a safe place protected

from dust and moisture.

 Check the appliance for damage. Do not use if damaged!

 During use, ensure adequate ventilation. Ensure that no poisonous

gases or vapours can be inhaled. Wear protective clothing (e.g. long

sleeved clothing, protective goggles).

 For longer work interruptions, disconnect the appliance from the voltage

source.

 Avoid use of the appliance on all plastic or synthetic material surfaces.

NOT SUITABLE for surfaces of electronic devices, such as e.g. mobile

phones, as the setter reaches a high temperature and may melt the

material and/or the surfaces.

 Do not decorate clothes of small children with rhinestones (small parts

could get swallowed).

 After fixing the rhinestones wash your hands carefully.

 Observe national and international safety, health and work protection

regulations.

Preparation:

Please take your time and read the operating instructions carefully

before putting the appliance into operation and keep the operating

instructions for future reference.

It is not allowed to change settings or make modifications from those

set by the manufacturer. It could be dangerous to change the structure

of the device on your own authority, to remove parts or to use parts

which are not approved by the manufacturer. (If you change the structure

of the device on your own authority you risk e.g. an electric shock, a

short circuit and burns.)

Scope of delivery:

1 Operating Instructions

1 Rhinestone Setter

8 tip-piece-kit for various stone sizes and forms (tool tips)

1 security stand

2 x 200 rhinestones

Please check the goods for completeness

Instructions for Use

No. 48450

Rhinestone Setter Kit

IAN 73860

Explanation of the pictures:

rhinestone setter

flat tip approximately Ø 5 mm (suitable for all stones smaller than

ø 5 mm).

flat tip approximately Ø 9,5 mm (suitable for all stones bigger than

ø 5 mm and smaller than ø 9,5 mm).

concave tip approximately Ø 7 mm (tip with marking 34. Suitable

for stones from ø 5 mm to ø 7 mm).

 concave tip approximately Ø 5 mm (tip with marking 20. Suitable

for stones from ø 4 mm to ø 5 mm).

 concave tip approximately Ø 4 mm (tip with marking 16. Suitable

for stones from ø 3 mm to ø 4 mm).

concave tip approximately Ø 3 mm (tip with marking 10.Suitable

for stones from ø 2 mm to ø 3 mm).

 concave tip approximately Ø 2 mm (tip with marking 8. Suitable

for stones smaller than ø 2 mm).

 mini iron-shaped tip (suitable for all stones with a big surface 

maximum ø 14 mm).

 security stand (for safe putting down of the hot Rhinestone Setter).

Explanation of the symbols:

Do touch the tip of the tool! The tip is very hot! Risk of burns!not

Do emerge the appliance into water and do not expose it tonot

moisture. Risk of electric shock!

The temperature on tool tip is very high during operation! Risk

of burns!

Do screw on the tip with force!not

Put away the appliance correctly on the stand, if the tip is hot

and the setter is not in use (picture VIII).

Produkt Specifikationer

Mærke:	Crelando
Kategori:	Ikke kategoriseret
Model:	IAN 073860

Har du brug for hjælp?

Hvis du har brug for hjælp til Crelando IAN 073860 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Crelando Manualer

Crelando IAN 442012 Manual

17 August 2025

Crelando HG06256E Manual

17 August 2025

Crelando IAN 288514 Manual

21 Juni 2025

Crelando IAN 340338 Manual

26 December 2024

Crelando IAN 368017 Manual

30 August 2024

Crelando IAN 115769 Manual

30 August 2024

Crelando IAN 73860 Manual

30 August 2024

Crelando IAN 107904 Manual

30 August 2024

Crelando HG05278A Manual

30 August 2024

Crelando IAN 367544 Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Haws 8355WCW Manual

9 December 2025

Gladiator GALG36CKKSG Manual

9 December 2025

Ruvati RVA2445CER Manual

9 December 2025

Bulbrite 773158 Manual

9 December 2025

Gladiator GAJG48KDKSG Manual

9 December 2025

Thames & Kosmos Robotics Smart Machines: Rovers & Vehicles Manual

9 December 2025

Blumfeldt Johnstone Manual

9 December 2025

Vaxis Litecomm Manual

9 December 2025

Blumfeldt Fire Globe Manual

9 December 2025

Capital Sports Hyper Cap Manual

9 December 2025