Draper 81315 Manual

Draper Måling 81315

Læs nedenfor 📖 manual på dansk for Draper 81315 (1 sider) i kategorien Måling. Denne guide var nyttig for 4 personer og blev bedømt med 4.6 stjerner i gennemsnit af 2.5 brugere

Download PDF

Side 1/1

Original Instructions

Version 3 – 02/25

Specication

Stock No. 81315

Part no. MFE9L

Reservoir capacity 9L

Dimensions 250mm (L) × 320mm (W) × 620mm (H)

Suction probe dimensions;

Plastic 4mmØ × 1130mm

6mmØ × 1130mm

10mmØ × 1120mm

Copper 4mmØ × 600mm

Net weight (empty) 4kg

Safety Instructions

• Wear suitable personal protective equipment (PPE). wear eye protection.ALWAYS

• Used engine oil is carcinogenic – wear protective gloves.

• Always store in an upright position in a secure place.

• Keep out of the reach of children.

Extractor operation

Note: Prior to connection consult vehicles handbook or Haynes manual as

this may not be suitable for all vehicles.

Note: DO NOT allow waste uid types to mix in the reservoir. Dispose of

waste uids in accordance with the relevant environmental health and

safety guidelines.

Oil extraction:

− Ensure the vehicle is on level ground before use. Select the most

suitable nozzle for the job in hand and insert into the pickup hose.

− Remove dipstick and insert tube fully down, raise the handle to the

highest point and pump several times full strokes to create a

vacuum. This will create a consistent and automatic ow.

Releasing Pressure:

− To release the pressure simply push down on the spring loaded safety

pressure release valve until the pressure has completely dropped.

− To empty the reservoir, remove the reservoir cap and pour into a suitable

storage/transport container.

Identication

Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: sales@drapertools.com

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK Delta International BV, Oude Graaf 8, 6002 NL, Weert, Netherlands 0225

(1) Probe 1 - 4mmØ × 1130mm

(2) Probe 2 - 6mmØ × 1130mm

(3) Probe 3 - 10mmØ × 1120mm

(4) Probe 4 - 4mmØ × 600mm (Copper)

(4)

(3)

(2)

(1)

81315

VACUUM

OIL/FLUID

EXTRACTOR