Erica Synths Black Stereo Reverb Manual

Erica Synths Tastatur Black Stereo Reverb

Læs gratis den danske manual til Erica Synths Black Stereo Reverb (1 sider) i kategorien Tastatur. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Erica Synths Black Stereo Reverb, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
BLACK STEREO REVERB
SIZE
R IN
L (MONO) IN
SIZE CV TONE CV FBK CV
FREEZE
R OUT
L OUT
B
D
TYPE
R
H
C
MODE
TONE FEEDBACK/SPN
SIZE CV
FREEZE
SAVE
SHIFT
112dB
PATCH
Transport the instrument carefully, never let it drop or fall
over. Warranty does not apply to modules with visual
damages.
The module has to be shipped in the original packaging
only. Any module shipped to us for return, exchange and/or
warranty repair has to be in its original packaging. All other
deliveries will be rejected and returned to you. Make sure
you keep the original packaging and technical documentation.
This device complies to the EU guidelines and is manufac-
tured RoHS conforming without use of lead, mercury,
cadmium and chrome. Nevertheless, this device is special
waste and disposal in household waste is not recommended.
User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Black8.
Copying, distribution or any commercial use in any way is
prohibited and needs the written permission by Erica
Synths.Specifications are subject to change without notice.In
case of any questions, feel free to contact us through
www.ericasynths.lv.
You will find Erica Synths terms of warranty at
www.ericasynths.lv
Items for return, exchange and/or warranty repair have to
be registered at SUPPORT on www.ericasynths.lv and send
back to us according to instructions in the support page.
SAFETY INSTRUCTIONS
Please follow the instructions for use of the Erica Synths module below,
‘cause only this will guarantee proper operation of the module and
ensure warranty from Erica Synths.
Water is lethal for most of the electric devices, unless they are made
waterproof. This Erica Synths module is NOT intended for use in a
humid or wet environment. No liquids or other conducting
substances must get into the module. Should this happen, the
module should be disconnected from mains power immediately,
dried, examined and cleaned by a qualified technician.
Do not expose the module to temperatures above +50° C or below
-20° C. If you have transported module in extreme low temperatures,
leave it in room temperature for an hour before plugging it in.
3. Push and hold the SHIFT and FREEZE buttons simultaneously and
turn the Eurorack system on. The five LEDs on the right-hand
side will start blinking, indicating that the firmware update mode
is active.
4. Now, play the audio file from your computer. The left five LEDs
will indicate the audio level of the incoming firmware file. At least
3 LEDs have to be illuminated for a sucient audio level. If less
than 3 LEDs are active, flip the TYPE switch to the B position to
increase the audio level of the incoming signal.
5. The firmware update will take few minutes. During the firmware
update a blinking FREEZE button indicates that the update is
going well, a blinking SHIFT button indicates an error. In case of
an error, retry the update from step 1.
6. Once the update is completed, restart your rack.
FIRMWARE UPDATE
The Black Stereo Reverb module features an audio bootloader for
firmware updates. In order to update the firmware:
1. Download the audio file to your computer.
2. Turn o your Eurorack system and connect the audio output (headphones out or
audio output from a soundcard) to the L(MONO) IN of the Black Stereo Reverb
module. Set the TYPE switch to the D position (lowest).
THANK YOU FOR PURCHASING THIS ERICA SYNTHS
BLACK SERIES MODULE!
The Erica Black Series includes high-end, unique functionality and superior quality
modules. Only the best, highest quality components are used, all inputs and outputs
are protected against undesired overvoltage. When designing the Black Series,
we prioritized usability. Big knobs are assigned to functions that make dierences
in the sound. The Black series consists of a range of modules that are needed to put
together an entire synth. Enjoy!
The Erica Synths Black Reverb is a versatile hi-fi stereo FX module with lots of
unique features based on our custom DSP engine. The reverb sources are
selectable Tape, BBD and "dirty BBD" digital; emulations with three modes, each –
Room, Hall and Cathedral. Delicate room size control, feedback, feedback tone
and stereo spin controls allow for designing extremely delicate reverberation
eects. CV control over various parameters and the ability to save up to 10 presets
will make this module an integral part of any performance rack.
The modules run on new Erica Synths DSP hardware and the eects are
developed in collaboration with Dutch company 112.dB (www.112db.com) who
make some of the most beautiful sounding eects.
FEATURES:
Reverb based on Tape, BBD and “Dirty” BBD lines
Three room sizes
Manual and triggered FREEZE with 1V/oct tracking
10 preset patches
CV control over size, feedback, tone, dry/wet mix and preset selection
Adjustable stereo spin
SPECS:
Max audio input level before clipping 16Vptp
CV input range (full span) -5V - +5V
Sampling frequency 48kHz, 24bit
Audio codecs -108 dynamic range,
-98dB THD+N
Power consumption 120mA@+12V, 39mA@-12V
Module width 12HP
Module depth 35mm
SIZE
Manually adjust a venue size from room to
megastructures, like cathedral and playback
frequency when in FREEZE mode. SIZE CV is
added to the knob position. This knob is also
used for selecting save/recall preset slots
FEEDBACK
Adjust the feedback level! In full CW setting,
the module will go into self-oscillation.
The Feedback CV is added to the position
of the knob.
TYPE
Select among Tape, BBD and
"Dirty BBD" delay lines
TONE / SPN
The TONE/SPN (SPIN) knob controls the
tone of the reflected signals or spinning
the reflections across a stereo field
MONO
These are the audio inputs of the module.
You can patch a mono signal into the L
(MONO) input and it will be automatically
routed to the R input
SIZE CV
This is the SIZE CV input, the CV is added to
the setting of the SIZE knob. The SIZE CV
input is calibrated to track 1V/oct
SHIFT
The SHIFT button adds extra functionality to
the module: 1. In order to SAVE the preset
patch, push and hold the SHIFT button and
rotate the SIZE knob to select one of 10 preset
slots, represented by 10 LEDs, then push the
FREEZE/SAVE button for 1 second!
2. In order to RECALL a patch, push and hold
the SHIFT button and rotate the SIZE knob to
select one of 10 preset slots; now, push the
FREEZE button promptly and the preset will
be loaded. 3. Push and hold the SHIFT button
and rotate the TONE/SPN knob to spin the
reflected signals across the stereo field
FREEZE
Use this button for freezing the reflected
audio signal and for saving patches. When
in freeze mode you can use the SIZE knob
or SIZE CV to manipulate the playback
frequency of the audio loop
FBK CV
This is the FEEDBACK CV input, the CV is
added to the setting of the FEEDBACK knob
TONE CV
This is the TONE CV input, the CV is added
to the setting of the TONE knob
L OUT / R OUT
These are audio outputs of the module
FREEZE
The first gate or trigger applied here will
initiate FREEZE, the second gate or trigger
unfreezes the audio buer
MODE
The MODE switch selects dierent settings for
early/late delay mix that aect room size feel
LEDS
Normally, the 10 LEDs indicate audio
signal levels for the left and right channels,
but they also represent 10 preset slots
PATCH
This is the patch CV input – with a CV
applied here, the module will switch
among the 10 preset patches
DRY / WET
Adjust the Dry/Wet setting manually!
The Dry/Wet circuit is fully analog
SIZE CV
This is the SIZE CV attenuator
BLACK REVERB
DRY/WET

Produkt Specifikationer

Mærke: Erica Synths
Kategori: Tastatur
Model: Black Stereo Reverb

Har du brug for hjælp?

Hvis du har brug for hjælp til Erica Synths Black Stereo Reverb stil et spørgsmål nedenfor, og andre brugere vil svare dig


Tastatur Erica Synths Manualer

Erica Synths

Erica Synths Black Stereo Reverb Manual

7 November 2025
Erica Synths

Erica Synths Fusion VCO V2 Manual

6 November 2025
Erica Synths

Erica Synths Drum Modulator Manual

6 November 2025
Erica Synths

Erica Synths Fusion Delay / Flanger / Vintage Ensemble Manual

6 November 2025
Erica Synths

Erica Synths Steampipe Manual

5 November 2025
Erica Synths

Erica Synths Black Quad VCA2 Manual

5 November 2025
Erica Synths

Erica Synths EDU DIY S&H Noise Module Manual

4 November 2025
Erica Synths

Erica Synths Drum Mixer Lite Manual

4 November 2025
Erica Synths

Erica Synths Mutant BD9 Manual

28 September 2025
Erica Synths

Erica Synths Black Stereo Delay Manual

28 September 2025

Tastatur Manualer

Nyeste Tastatur Manualer

Adesso

Adesso WKB-1320CB Manual

7 November 2025
Adesso

Adesso Tru-Form WKB-1500GB Manual

7 November 2025
Adesso

Adesso EasyTouch AKB-680UW Manual

6 November 2025
BakkerElkhuizen

BakkerElkhuizen Goldtouch Travel Go2 Manual

6 November 2025
TG3 Electronics

TG3 Electronics Medical Keyboard Manual

5 November 2025
Torso Electronics

Torso Electronics T-1 Manual

5 November 2025
Melbourne Instruments

Melbourne Instruments Delia Manual

5 November 2025
Intellijel

Intellijel Unity Mixer 1U Manual

5 November 2025
Oberheim

Oberheim OB-3700 Manual

4 November 2025
Intellijel

Intellijel Switched Mult 1U Manual

4 November 2025