Hager 80040001 Manual

Hager Smart hjem 80040001

Læs gratis den danske manual til Hager 80040001 (2 sider) i kategorien Smart hjem. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Hager 80040001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Berker GmbH & Co. KG, Zum Gunterstal, 66440 Blieskastel, Germany - + 49 6842 945 0 + 49 6842 945 4625 info@berker.de berker.comT F

Operating and

assembly instructions

8004 00 0x

Busapplicationunitﬂush-

mounted,system-/easylink

01.2023

(1)

(5)

(4)

(5)

(2)

(3)

(5)

(8)

(7)

(6)

Safety instructions z

Electrical equipment may only be installed and

assembledbyqualiﬁedelectricians.Always

followtherelevantaccidentpreventionregulati-

ons.

Failuretocomplywiththeseinstallationinstruc-

tionsmayresultindamagetothedevice,ﬁreor

otherhazards.

Wheninstallingandlayingcables,alwayscomply

withtheapplicableregulationsandstandardsfor

SELVelectricalcircuits.

Duringrenovationwork,protectthedevicefrom

pollutionbypaint,wallpaperpaste,dustetc.The

devicecanbedamaged.

Theseinstructionsareanintegralcomponentof

theproductandmustberetainedbytheend

user.

Designandlayoutofthedevice

Figure 1: Front view

Figure 2: Rear view

(1) Illuminated programming button

(2) Mounting device for fastening clamps

(3) Dust protection cover for user interface (suitable

for labelling  eld sticker)

(4) User interface

(5) Screw holes for dismantling protection

(6) Plug-in interface for temperature sensor

(7) KNX bus connection terminal

(8) Attachment claws

Function

System information

This device is a product of KNX system and corre-

sponds to the KNX guidelines. Detailed specialised

knowledge obtained from KNX training courses

is required for comprehension. The planning, installa-

tion and commissioning are carried out with the help

of KNX-certi ed software.

systemlinkstart-up

The function of the device is software-dependent.

The software is to be taken from the product databa-

se. You can  nd the latest version of the product da-

tabase, technical descriptions as well as conversion

and additional support programmes on our website.

easylinkstart-up

The function of the device is con guration-depen-

dent. The con guration can also be done using

devices developed specially for simple setting and

start-up.

This type of con guration is only possible with

devices of the easy link system. easy link stands

for easy, visually supported start-up. Precon gured

standard functions are assigned to the in/outputs by

means of a service module.

Correct use

- Attaching application modules, e.g. push-button,

thermostat, to the KNX system

- Installation into wall box according to DIN 49073

Productcharacteristics

- Start-up and programming in S-mode and E-mode

- Localisation function by integrated buzzer (siren)

- Connection for external temperature sensor

- Integrated dust protection cover for protection of

the user interface

Information for electricians

Installation and electrical connection

DANGER!

Touchinglivepartsintheinstallation

environmentcanresultinanelectric

shock!

Anelectricshockcanbelethal!

Disconnecttheconnectingcables

beforeworkingonthedeviceand

coveralllivepartsinthearea!

Connectingandinstallingthedevice

Connect bus line via KNX bus terminal (7): red +,

black –.

Connect external temperature sensor via connec-

ting terminal (6) if necessary.

For mounting in a  ush-mounted wall box use

 xing claws (8) or in a hollow wall wall-box use

screws for  xing.

Mount the device into the wall box in the correct

position.

If no application module is mounted, close dust

protection cover for user interface.

6LE000469C

6LE000469C__80040001__BUSANKOPPLER-UP__GB__2021-03__manual_Arbeitsdatei.indd 1

6LE000469C__80040001__BUSANKOPPLER-UP__GB__2021-03__manual_Arbeitsdatei.indd 16LE000469C__80040001__BUSANKOPPLER-UP__GB__2021-03__manual_Arbeitsdatei.indd 1

23.01.2023 12:33:51

23.01.2023 12:33:5123.01.2023 12:33:51