Heatit Z-Gateway Manual

Heatit Ikke kategoriseret Z-Gateway

Læs gratis den danske manual til Heatit Z-Gateway (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 98 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 49.5 anmeldelser. Har du et spørgsmål om Heatit Z-Gateway, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

STEP 1 DOWNLOAD THE HEATIT ZGATEWAY APP

Scan the QR code to download the software “Heatit Z- Gateway”

from App Store for iPhone/iPad or from Google Play for Android

devices.

Quick Installation Guide

HEATIT

ZGATEWAY

01.08.2019 Ver 2019-A

SUPPORTED SMART

PHONE SYSTEM VERSIONS

• iOS iPhone/iPad

Requires iOS 6.0 or later

• Android Smartphone/Tablet

Requires Android 4.0 or later

Set up the gateway

from a

Smartphone/

Tablet

Download the Heatit Z-Gateway user manual here

manuals.heatit.com

Heatit Z-Gateway

STEP 2 SET UP THE GATEWAY

Please click the “ ” icon in the App and follow the instructions

to set up the gateway.

STEP 3 LOG ON TO THE ZWAVE GATEWAY

Tap the gateway icon to log on to the gateway.

Enter the administration account name to log on.

The default administration account is “admin”.

The default administration password is empty (left blank).

STEP 4 ADD A ZWAVE DEVICE  Regular

To add a Z-wave device in the gateway :

1. Set the gateway in adding mode.

a. Tap the “DEVICE” icon in the App.

b. Tap the “ ”.

c. Select the device you wish to add and then follow the on-

screen instructions. Choose ”Other Z-Wave device” if you

can’t ﬁnd the product.

2. When the gateway recognizes the Z-Wave device, a sound

signal signiﬁes a successful addition.

NB! If the device failed to be added to the gateway, please check:

a. if the Z-Wave frequency of the device is the same as the

gateway.

b. that the device is not already added in another network. If

so, run a removal procedure before trying again.

STEP 5 ADD A NEW ROOM

a. Tap the ”ROOM” button.

b. Tap the “ “ icon to add a new room.

c. Name the room and then press ”OK”.

After a room is added, click the room icon to add Z-Wave

devices into the room. If there are temperature sensors and

humidity sensors in the room, the temperature and humidity

values will be displayed in the room overview.

If there is a camera installed in the room, add the camera in the

gateway. The camera video will be displayed for the room when

this room is clicked in the live video display.

ADD A ZWAVE DEVICE  SmartStart

Make sure that the device supports SmartStart.

1. Set the gateway in adding mode.

a. Tap the “DEVICE” icon in the app.

b. Tap the “ “.

c. Select ”SmartStart”.

d. Scan the QR-code on the device or on the device manual

while the device is powered oﬀ.

e. After conformation from the app, turn the device on.

2. When the gateway recognizes the Z-Wave device, a sound

signal signiﬁes successful addition.

Android iPhone iPad

Produkt Specifikationer

Mærke:	Heatit
Kategori:	Ikke kategoriseret
Model:	Z-Gateway
Kode for international beskyttelse (IP):	IP20
Bredde:	96 mm
Dybde:	21 mm
Højde:	96 mm
Vægt:	129 g
Relativ luftfugtighed ved drift (H-H):	0 - 80 %
Driftstemperatur (T-T):	0 - 50 °C
Intern hukommelse:	32 MB
Harmoniseret systemkode (HS):	85176990
Indgangsspænding:	230 V
Processorfrekvens:	600 MHz
Indgangsfrekvens:	50 Hz
Indbygget processer:	Ja
Antal installerede processorer:	1