Kathrein CAS 80 Manual

Kathrein TV antenne CAS 80

Læs gratis den danske manual til Kathrein CAS 80 (26 sider) i kategorien TV antenne. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Kathrein CAS 80, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/26
1 / 26
■Refl ector made of aluminium, powder coated
■Feed system support made of galvanised sheet steel,
powder coated
■Mast clamp made of sheet steel, hot-dip galvanised
■Optimal electrical data in lowest mechanical dimensions
due to off set-feed
■Available in graphite, white or red brown
■Items supplied: Refl ector with pre-assembled mast and
feed system support, user manual
■Patented tilt facility at the multi-feed adaptor plate, allows
optimisation of the LNB positions for multi-feed reception
■The optimum performance of the satellite antennas is only
given in conjunction with the original Kathrein LNBs.
Features
■Without additional components, two universal feed sys-
tems to receive the signals of satellites 3° or 4° (e.g. ASTRA
19.2°/23.5°) or 6° apart (e.g. ASTRA/EUTELSAT-HOTBIRD) can
be mounted on the boom.
For other satellite spacings, the multifeed adapter plates
ZAS 90 (Order no: 218684) and ZAS 1218 (Order no: 204500011)
are available (see „Optional Accessories“ on page 1).
Intended Use
The CAS80 parabolic antenna is intended solely for the reception of satellite signals use as a domestic antenna and for only .
DIN 4131 specifi es that a domestic antenna has no more than 6 m free mast length and a fi xed-end moment up to 1650Nm.
It is unsuitable for mounting on structures that are liable to vibration.
Make absolutely sure that the values for the maximum load listed in the Technical Data (on the last page) are complied with.
If this load is exceeded, parts could break away!
The CAS80 parabolic antenna is designed for use with a feed system (LNB) for reception of the signals from one satellite position, or
two feed systems for multi-feed applications for reception of the signals from two satellite positions with 3°–4° or 6° satellite spa-
cing.
When the additional ZAS90 or ZAS 1218 multi-feed adapter plate is used, the parabolic antenna is also suitable for three feed sys-
tems. The feed systems and instructions for their installation are not included in the scope of supply of the parabolic antenna.
Do not use the parabolic antenna for purposes other than those listed in this manual! Any use other than that specifi ed
above will void the warranty or guarantee.
In particular, any of its or never modify components fi t any components other than those expressly intended by the
manufacturer for use with the antenna.
Breach of these rules may lead to the antenna no longer being suffi ciently stable and safe!
Optional Accessories
■ZAS 90, order no. 218684 multi-feed adapter plate
Installation items 2 and 3 cannot be mounted
at the same time.
CAS 80gr 20010027
CAS 80ro 20010028
CAS 80ws 20010029
Sat Antennas
■ZAS 1218, order no. 204500011 multi-feed adapter plate
Without notches for any satellite spacing
2 / 26
●Under no circumstances install antennas in the vicinity of overhead power cables, otherwise the absolutely essen-
tial clearance requirements may no longer be satisfi ed. Maintain a clearance of at least 1 m from all other electrical
devices in all directions!
If you or metal parts of the antenna touch any electrical device there is a serious risk of a fatal electric
shock!
●Never work on antenna systems during a thunderstorm or when a thunderstorm is approaching.
There is a risk of a fatal electric shock!
●Never install antennas on buildings with easily fl ammable roof coverings such as straw, reeds or similar materials!
Otherwise there is a risk of fi re due to atmospheric over-voltages (static charges) or lightning discharges
(e.g. during thunderstorms).
●The installation operations described here assume good craftsmanship capabilities and knowledge of the behaviour
of materials under the eff ects of wind. Therefore if you do not possess the required skills, have this work performed
by a specialist.
●The person doing the work must wear strong non-slip footwear, must not be liable to dizziness, must be able to
move around safely on the roof and have a secure standing and attachment position (if necessary, wear a safety
harness when on the roof).
●Make sure that the roof is able to bear your weight. Never walk on fragile or unstable surfaces! In case of doubt,
contact a qualifi ed specialist dealer or specialist roofi ng contractor to fi nd an appropriate installation location.
●Do not go on to roofs or other high places without a correctly attached safety harness that is in good condition.
Otherwise use a work platform.
●Ladders or other means of climbing must be in faultless condition (dry, clean and non-slip). Never build any
irresponsible “scrambling towers”!
●If there is a risk that passers-by may be injured by items falling from above during installation, you must close off
the risk area using barriers! Make sure that no-one is underneath the installation location.
Risk of death or injury due to falling from the roof, falling through the roof and falling parts, plus the
possibility of damage to the roof.
●The respective national safety regulations and current standards such as DIN EN 60728-11 should be complied with.
●Any other use or failure to comply with these instructions will result in voiding of warranty coverage.
Basic Safety Instructions
Before you install, connect or use the parabolic antenna, !make sure that you comply with the instructions in this manual
If you disregard these instructions,
●malfunctions may arise, creating to your life and health,risks
●defects in the installation or the connection may cause to the antenna or to the attachment point,damage
●the manufacturer will for malfunctions and damage arising!not accept liability
When working on antenna systems, please remember your duty of care towards your fellow human beings!
Keep the manual for any questions that arise later, and if the building passes to another owner, pass it on to the new owner!
●Do not undo the cable tie on the carrier arm until you have swung out the boom and secured it
using the two M6 bolts (see section “Installing the antenna” item c “Installing the carrier arm”).
This is so as to prevent the boom swinging out during transport of the carrier arm. For this reason,
always carry the carrier arm as show in the illustration on the right.
This is to avoid the risk of injury by pinching!

Produkt Specifikationer

Mærke: Kathrein
Kategori: TV antenne
Model: CAS 80

Har du brug for hjælp?

Hvis du har brug for hjælp til Kathrein CAS 80 stil et spørgsmål nedenfor, og andre brugere vil svare dig


TV antenne Kathrein Manualer

Kathrein

Kathrein CAS 60 Manual

8 Juli 2025
Kathrein

Kathrein CAS 90 Manual

8 Juli 2025
Kathrein

Kathrein ESU 56 Manual

27 Juli 2024
Kathrein

Kathrein BAS 66 Skew Manual

26 Juli 2024
Kathrein

Kathrein ESU 51 Manual

21 Juli 2024
Kathrein

Kathrein ESU 57 Manual

19 Januar 2024
Kathrein

Kathrein CAS 80 Manual

26 December 2023
Kathrein

Kathrein ZAS 140 Manual

22 December 2022
Kathrein

Kathrein HDP 850 GPS Manual

9 December 2022

TV antenne Manualer

Nyeste TV antenne Manualer

Insignia

Insignia NS-ANT700HA Manual

29 September 2025
President

President Himalaya WB Manual

25 September 2025
RAMI

RAMI AV-530 Manual

24 September 2025
One For All

One For All 14460 Manual

13 September 2025
Axing

Axing TAA 3-00 Manual

10 September 2025
Wilson

Wilson 301135 Manual

9 September 2025
Wilson

Wilson 301121 Manual

8 September 2025
Wilson

Wilson 301124 Manual

8 September 2025
CSL

CSL 300026 Manual

7 September 2025
Schwaiger

Schwaiger DTA4000 Manual

31 August 2025