Lowell ACS-2010-RPC-HW Manual

Lowell Ikke kategoriseret ACS-2010-RPC-HW

Læs gratis den danske manual til Lowell ACS-2010-RPC-HW (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Lowell ACS-2010-RPC-HW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

INTERNAL USE ONLY: PN 24218

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1109

Model ACS-2010-RPC-HW | Rev. 12.20.23 | pg. 1/3

POWER RATING: 120VAC 60Hz 20A

CHASSIS: 30” x 2” x 2” steel chassis with black powder epoxy finish

TERMINATION: Hardwired non-metallic flexible conduit (whip) with pigtail leads. The six ft.

conduit can be trimmed in the field if needed.

RECEPTACLES: Total of ten NEMA 5-20R receptacles (five duplex). One duplex is un-

switched (always on when the unit is supplied with power). Four duplexes are switched

(controlled by a remote switch or sequencer through the RPC terminal).

UNIVERSAL MOUNTING BRACKETS: The universal brackets allow for power strip instal-

lation in a variety of applications with receptacles facing front, center or rear. Brackets are

engineered with multiple mounting points and include two types of hardware to facilitate

easy installation in a rack with adjustable or fixed rails, to a wall, or under a desk/counter.

The brackets can be mounted so they are exposed for easy access or concealed beneath

the power strip for an aesthetically cleaner installation.

CERTIFICATION: ETL Listed in U.S./Canada

ORIGIN: Assembled in the U.S.A. with global components.

INSTALLATION

Use the universal mounting brackets to install the power strip near the equipment. Use

low-voltage cable to connect the RPC terminal to a remote switch or sequencer.

Hardwired power strip with ten 20A receptacles (ve duplex) and remote power control func-

tion (RPC) can be combined with a variety of remote switches or sequencers to provide a

low-voltage method of turning specic equipment on and off from a remote location. The

ability to safely control AC power distribution without directly accessing equipment adds

convenience, while minimizing the potential for unauthorized system modications.

ACS Series Model No.

ACS-2010-RPC-HW

AC Power Strip w/Remote Power Control

FEATURES

Certied

US Steel

Assembled

In USA

with Global

Components

A&E SPECIFICATIONS

The ETL Listed power strip with remote power control shall be Lowell model ACS-2010-

RPC-HW, which shall have a power rating of 120VAC 60Hz 20A. The chassis shall be steel

with black powder epoxy finish, measuring 30” x 2” x 2”. It shall feature one unswitched

and four switched NEMA 5-20R duplex receptacles. The four switched duplexes shall be

controlled by an external power switch or sequencer (ordered separately) that is connected

to the power strip’s remote power control terminal. The power strip shall be made in the

U.S.A. with global components. It shall terminate with a six ft. non-metallic flexible conduit

with pigtail leads, and include universal mounting brackets with hardware to mount to a

rack, wall or desk.

Note: An external

power switch or se-

quencer is required

(order separately,

pg. 2).

Six-ft.

non-metallic

exible conduit ro-

tates in any direction.

RPC terminal

connects to a

remote switch

or sequencer.

Four

duplexes are

controlled by a

remote switch

or sequencer

connected to

the RPC

terminal.

One duplex

is unswitched

(always on).

Mounting brackets

INTERNAL USE ONLY: PN 24218

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.

Spec 1109

Model ACS-2010-RPC-HW | Rev. 12.20.23 | pg. 2/3

On: Green LED indicates AC power is applied to receptacles.

Power: Red LED indicates AC power is available.

Test: Test applies power to receptacles independent of remote switch or sequencer.

SW, Com: Connection between Switch and Common terminals activates internal relay and applies power to receptacles.

V+ Out: +24VDC output. Use only with RPS Series switches

Ex. Lowell RPS Series

REMOTE POWER CONTROL: Use low-voltage cable to connect the RPC terminal to an external switch or sequencer.

Remote

Switch

Sequencer

Connection to Remote Switch

(wall or rackmount):

Connection to Sequencer or Control System

with dry contact closure:

RPC Terminal:

Ex. Lowell SEQ Series

(w/classic connections)

Model No.

Description

RPSW-P

SPST switch w/maintained closure, one-gang white wall plate, rocker switch

RPSW-KP

SPST switch w/maintained closure, one-gang white wall plate, key switch

RPSB-R

SPST switch w/maintained closure, 1U rackmount panel, rocker switch

PRSB-KR

SPST switch w/maintained closure, 1U rackmount panel, key switch

SEQ-4

Four-step sequencer

SEQ-8

Eight-step sequencer

SEQR-4

Four-step rackmount sequencer w/rocker switch, 1U

SEQR-4K

Four-step rackmount sequencer w/key switch, 1U

SEQR-8

Eight-step rackmount sequencer w/rocker switch, 1U

SEQR-8K

Eight-step rackmount sequencer w/key switch, 1U

COMPATIBLE Switches & Sequencers: Order separately. See individual product spec sheets for more information.

3) REATTACH CONNECTOR:

Twist/push the connector to attach it to

the shortened conduit.

1) REMOVE EXCESS LENGTH:

Snip reinforcing rib at desired length.

Bend the conduit to expose the cut and

carefully cut around the conduit without

cutting the wires inside. Remove excess

length.

2) REMOVE CONNECTOR:

Carefully snip the last rib(s) to loosen the

connector from the excess length, then

twist/pull to remove it.

HOW TO TRIM THE CONDUIT: The 6 ft. non-metallic flexible conduit can be trimmed in the field.

Produkt Specifikationer

Mærke:	Lowell
Kategori:	Ikke kategoriseret
Model:	ACS-2010-RPC-HW

Har du brug for hjælp?

Hvis du har brug for hjælp til Lowell ACS-2010-RPC-HW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Lowell Manualer

Lowell ACS-2020-IG-6C-HW Manual

11 December 2024

Lowell ACR-SEQ4-1509 Manual

11 December 2024

Lowell ACS-2006-3C-RPCP-HW Manual

10 December 2024

Lowell ACS-2014-HW Manual

7 December 2024

Lowell ACS-1510-RPC Manual

7 December 2024

Lowell RPC-30 Manual

7 December 2024

Lowell ACS-2012 Manual

7 December 2024

Lowell ACS-2024-2C Manual

7 December 2024

Lowell ACS-1524 Manual

7 December 2024

Lowell ACS-1507 Manual

7 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox Airvox SW695 Manual

15 Juni 2025

Stiga SBC 635 KD Manual

15 Juni 2025

Cleveland 36CGM300 Manual

15 Juni 2025

Gourmia GTF7970 Manual

15 Juni 2025

Planet Audio P9630B Manual

15 Juni 2025

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025

Lavex 842CD12VST12 Manual

15 Juni 2025

Marshall RCP-PLUS Manual

15 Juni 2025

Hughes & Kettner BassForce XL Manual

15 Juni 2025

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025