Master Lock Biometric Security Safe LX110B Manual

Master Lock Pengeskab Biometric Security Safe LX110B

Læs gratis den danske manual til Master Lock Biometric Security Safe LX110B (52 sider) i kategorien Pengeskab. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Master Lock Biometric Security Safe LX110B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/52

POLSKI ..........................................................................26

MAGYAR .......................................................................28

ROMÂNÃ ......................................................................30

ČEŠTINA.........................................................................32

РУССКИЙ ........................................................................34

TÜRKÇE .........................................................................36

日本語 ..........................................................................38

英语 ..............................................................................42

BAHASA INDONESIA .....................................................44

한국어 ......................................................................... 46

ไทย ..............................................................................48

Biometric Security Safe Owner’s Manual

LX110B

Sentrysafe.com

Masterlock.eu

ENGLISH .......................................................................2

FRANÇAIS .....................................................................4

DEUTSCH .......................................................................6

NEDERLANDS ................................................................ 8

ESPAÑOL .......................................................................10

ITALIANO ......................................................................12

PORTUGUÊS ..................................................................14

ΕΛΛΗΝΙΚΆ ......................................................................16

NORSK ..........................................................................18

DANSK .........................................................................20

SUOMI ...........................................................................22

SVENSKA.......................................................................24

40 .............................................................................

ةيبرعلا

To delete all ﬁngerprint

registrations and return to

factory default setting:

Open the safe and remove the batteries.

Press and release the green button.

Press and hold the green button while re-installing the batteries.

Continue holding the green button for approximately ﬁve

seconds (from step 3 to step 4, do not release the button) until

the safe beeps twice.

ALL the ﬁngerprint registrations have been deleted, the

ﬁngerprint memory is empty and the safe is set back to the

factory default setting. Any ﬁngerprint can now open the door.

Additional Notes: A single ﬁngerprint cannot be deleted. If you

need to delete a user, all the ﬁngerprints will need to be deleted

and users will need to re-register.

To open the safe with the

battery jump kit:

If battery power in the safe is running low and cannot operate the

safe, or if the override key is misplaced, you can use the USB battery

jump kit (the battery case with the attached power cord) to open

the safe.

Important: This should not be used as a primary means to open

the safe.

Install 4 new AA alkaline batteries in the battery case of the

jump kit.

Remove the magnetic security cover on the right side of the safe

control panel.

Insert the Micro USB cord into the USB slot of the safe.

Scan a registered ﬁngerprint and the safe will operate normally.

Remove the Micro USB cord and replace the security cover on

the control panel.

Install 4 new AA alkaline batteries in the safe.

Bolt-Down Instructions:

To help provide maximum security, it is highly recommended that you

bolt down your safe.

Set the safe in the place you intend to bolt it down and open the

door.

Using a pencil mark the ﬂoor or wall through the holes provided

in the bottom or back of your safe.

Move the safe away and drill holes of the appropriate diameter

and depth for the type of hardware being used.

Place the safe back over the holes and install the fasteners as

required.

Note: It is not recommended to attempt to bolt your safe to

both the ﬂoor and wall. If bolting to a wall, please ensure the

safe is resting on a supporting surface such as a table or shelf.

Thank you for choosing Master Lock/SentrySafe to store all your important documents and valuables.

We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.

Important security note: Biometric safe models will initially open with ANY ﬁngerprint, therefore it is important to re-program the safe with your ﬁngerprints to provide

maximum security. Fingerprint memory has a maximum capacity of 30 ﬁngerprint registrations.

Biometric Security Safe Owner's Manual

Opening the safe for the ﬁrst

time and using the override key:

To open the safe the ﬁrst time or open without scanning a ﬁnger, the

override key can be used.

Remove the magnetic security cover

on the right side of the control panel.

Insert the override key

(the notch on the key handle must

be facing up) and turn counterclockwise.

Rotating the key will retract the bolts and open the safe.

Turn the key clockwise to remove the key.

Replace the magnetic security cover.

Do not store the override keys in the safe.

Installing batteries:

Open the safe door and locate the battery case on the back of

the safe door.

Slide the battery cover towards the bolts to open the battery

compartment.

Install 4 new alkaline AA batteries and replace the battery cover.

For all safe models, we recommend the following:

• Refrain from using rechargeable or Non-Alkaline batteries.

• Use quality name brand batteries.

• All batteries have expiration dates on them. Ensure those dates are as

close to 10 years out from current year as possible.

• When changing batteries do not mix battery brands.

• When replacing batteries, do not mix old batteries with new batteries.

Replace all batteries at the same time.

Registering your ﬁngerprint:

Important note - We highly recommend you add the same

ﬁngerprint multiple times and adjust your ﬁnger’s angle and

location between each registration to ensure the safe opens

on the ﬁrst attempt. As an example, during a single registration (3

scans), register the center of your ﬁngerprint – try to use the exact

same ﬁnger location all three times. Then repeat the registration

process with the same ﬁnger, using the top of your ﬁngerprint, again

trying to use the exact same ﬁnger location. Then repeat using the base

of your ﬁngerprint, the sides of your ﬁngerprint and so on.

Registering your ﬁngerprint

continued:

When the door is open, press the red button on the back of the

door (near the hinge) for one second and release.

When you see the orange light on the control panel, hold your

ﬁnger on the sensor and wait until the orange light turns off.

The safe will be silent during this step.

Remove your ﬁnger from the sensor.

Repeat steps 2 and 3 two additional times using the same

ﬁnger. Try to use the exact same ﬁnger location and angle. If

registration was successful a green light will ﬂash and the safe

will beep twice.

If the registration process failed, a red light will ﬂash and the

safe will beep three times. You will need to re-start at step 1 to

Additional Notes: If the ﬁngerprint memory is full, a red light

will ﬂash and the safe will beep ﬁve times.

Opening the door:

Place your ﬁnger onto the biometric sensor and wait until the

green light turns on. The safe will beep twice and the door will

open automatically. If the safe does not recognize the ﬁngerprint

(not registered or accepted), a red light will ﬂash and the safe will

beep three times. The safe will remain locked. If batteries need

replacement, after a successful opening, a red light will ﬂash and the

safe will beep three times.

Closing the door:

Hold the door completely closed and press the black button on the

left side of the control panel. The bolts will automatically engage and

lock the safe. If the door is not completely closed the bolts will stop,

the safe will beep 3 times and the safe will automatically re-open.

You will need to scan your ﬁnger again to reset the bolts and repeat

the closing process. The lock button will not work to move the bolts

during this event but returns to normal function after a successful

scan.

Produkt Specifikationer

Mærke:	Master Lock
Kategori:	Pengeskab
Model:	Biometric Security Safe LX110B
Type:	Fritstående pengeskab
Bredde:	430 mm
Dybde:	370 mm
Højde:	195 mm
Vægt:	10600 g
Brugervejledning:	Ja
Produktfarve:	Sort
Indvendig kapacitet:	25.4 L
Indvendig belysning:	Ja
Indvendige mål (B x D x H):	42.7 x 31 x 19.2 mm
Strømkilde type:	Batteri
Monteringstype:	Gulv/væg
Batteritype:	AA
Antal understøttede batterier:	4
Låsetype:	2 Keys, Fingerprint reader