PAC NDK736 Manual

PAC Ikke kategoriseret NDK736

Læs gratis den danske manual til PAC NDK736 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om PAC NDK736, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

CUSTOMER HELP LINE

USA 800-323-4329 • Canada 800-245-8777

Automotive Products Division

1040 Avenida Acaso • Camarillo, CA 93012, U.S.A.

USA Sales (800) 336-6500

Canada Sales (888) 922-3006 • USA Fax (805) 388-7950

For information about other American International automotive

accessories visit our website at:

http://www.americaninternational.net

NDK736 Mounting Kit

Nissan

2009-13 CUBE

2007-14 VERSA SEDAN

2007-12 VERSA HATCHBACK ( w/ Base CD Player)

2014 VERSA NOTE ( w/ Base CD Player)

VEHICLE APPLICATIONS

KIT ASSEMBLY INSTRUCTIONS

NISSAN VERSA (Use factory brackets for Double DIN)

1. Starting from the front, carefully pry up on the top dash vent trim and pull forward

to remove.

2. Remove the (2) Phillips screws securing the top edge of the radio trim bezel.

3. Carefully pull the radio trim bezel forward, disconnect all attached harnesses from the

back of the radio trim bezel and remove trim bezel.

4. Remove the (4) Phillips screws securing the factory radio to the sub-dash.

5. Carefully pull the radio forward, disconnect all harnesses and antenna connector and

remove radio.

DASH DISASSEMBLY

2007-12 NISSAN VERSA HATCHBACK

2007-14 NISSAN VERSA SEDAN

1. Remove the (2) Phillips screws (with plastic rings) securing the lower edge of the

Climate Control panel.

2. Carefully unclip and lower out of the way the Climate Control panel.

3. Remove the (2) Phillips screws securing the lower edge of the Radio/Vent trim bezel

to the sub-dash.

4. Carefully pry forward and unclip the lower edge of the Radio/Vent trim bezel and then

unclip the top edge and remove the bezel.

5. Remove the (4) Phillips screws securing the radio to the sub-dash

6. Pull the radio forward, disconnect all harnesses and antenna lead and remove radio.

DASH DISASSEMBLY

2009-13 NISSAN CUBE

1. This kit is an (ISO) mounting kit only. Remove metal sleeve from radio.

2. The mounting sleeve of your new radio and trim ring cannot be used when ISO

mounting an aftermarket radio. Your radio must have a removeable trim ring.

3. Insert left and right mounting brackets to rear of kit as shown in Figure A and attach

brackets to rear of pocket with small phillips screws supplied with kit.

4. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides

of radio using screws provided with radio when possible or screws supplied with kit.

5. Slide radio forward or backward for desired look and tighten screws.

IMB736 LEFT

IMB736 RIGHT

Fig A

Remove shaded tabs on

left and right bracket

(Right tab hidden in picture)

2 7

NOTES

Produkt Specifikationer

Mærke:	PAC
Kategori:	Ikke kategoriseret
Model:	NDK736

Har du brug for hjælp?

Hvis du har brug for hjælp til PAC NDK736 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret PAC Manualer

PAC CAM-GM51 Manual

11 Juli 2025

PAC TY1A-RS Manual

11 Juli 2025

PAC SR-F15009HX Manual

10 Juli 2025

PAC SRK-RAM13HX Manual

10 Juli 2025

PAC AAI-TY3 Manual

30 Juni 2025

PAC SRK-GM14HX Manual

10 Marts 2025

19 Februar 2025

19 Februar 2025

19 Februar 2025

19 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-3811 Manual

30 Juli 2025

Intermatic EI230W Manual

30 Juli 2025

Rockboard LED Light V2 Manual

30 Juli 2025

Advantech USB-5817 Manual

30 Juli 2025

Electro Harmonix 9DC-100 Manual

30 Juli 2025

Advantech UTC-515H Manual

30 Juli 2025

Extron MGP 641 xi 5K Manual

30 Juli 2025

Festo EMME-AS-80-M-LS-AMB Manual

30 Juli 2025

Tiptop Audio Octogain Manual

30 Juli 2025

Artec SE-ADL Manual

30 Juli 2025