SIIG CE-MT0712-S1 Manual

SIIG Wandstøtte CE-MT0712-S1

Læs gratis den danske manual til SIIG CE-MT0712-S1 (8 sider) i kategorien Wandstøtte. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om SIIG CE-MT0712-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

04-0529C

IMPORTANT: If you don't understand the installation instructions, please

consult an installation specialist

Tiltable LCD / TFT TV Wall Mount

Material: 2.0mm Cold Rolled Steel Plate

TV Size: 32" - 60"

Tilt: 0 / +15 degrees

Maximum load capacity: 165 lbs / 75 kgs

Wall distance: 3.3" / 84mm

Bubble level system included

Universal Mounting Pattern

Installation Instructions

Universal Tilting TV Mount - 32" to 60"

A-1 G

A-2 (x1) Key H

B I

C J

D K

E L

F M (×4) M8 Spacer

1 Phillips head screw driver

2 Stud finder for drywall installation

3 5/16" Socket and Wrench

4 Electric drill and 5/16"(8mm) masonry bit for concrete/brick installation

(×4) M4×12 screw

Caution

CAUTION: The maximum load capacity is 165 lbs. Use with products heavier than the maximum load capacity

may cause serious injury. See apparatus instructions.

Prior to the installation of this product, the installation instructions should be read and completely understood.

The installation instructions must be read to prevent personal injury and property damage. Keep these

installation instructions in an easily accessible location for future reference.

Recommended mounting surfaces: wood stud and solid-flat concrete. If the mount is to be installed on any

surface other than wood studs, use suitable hardware (not included but commercially available).

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could

result in damage to the display and/or damage to the mounting surface.

Do not install near heater, fireplace, air conditioning, in direct sunlight, or any other heat producing source.

Failure to do so may result in damage to the display and could increase the risk of fire.

The wall structure must be capable of supporting at least the maximum load capacity as indicated. If not, the

wall must be reinforced. Proper installation procedure by yourself or a qualified service technician, as outlined in

the installation instructions, must be adhered to. Failure to do so could result in serious personal injury.

(×4) M5×16 screw

(×4) M8×16 screw

(×4) M8×35 screw

Tools Required:

INSTALLATION AND OPERATING INSTRUCTIONS

(×4) M6×35 screw

(×4) M6×16 screw

Hardware kit:

(×4) M4×16 screw

It is recommended that two people perform the installation. Injury and/or damage can result from dropping or

mishandling the display.

(×4) M8/M6/M5 Washer

(×6) M8x80 Bolt

(×6) M8 Concrete Anchor

When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, it

is recommended that the wood studs be a minimum of 16" apart.

(×6) M8 Washer

(×4) M4×35 screw

Produkt Specifikationer

Mærke:	SIIG
Kategori:	Wandstøtte
Model:	CE-MT0712-S1
Bredde:	494 mm
Dybde:	84 mm
Højde:	820 mm
Vægt:	4100 g
Produktfarve:	Sort
Husmateriale:	Metal
Certificering:	UL
Monteringstype:	Væg
Hældningsvinkelområde:	0 - 15 °
Skærmstørrelse kompatibilitet:	32 - 60 "
Maksimal vægtkapacitet:	75 kg