SIIG CE-MT1B12-S1 Manual

SIIG Wandstøtte CE-MT1B12-S1

Læs gratis den danske manual til SIIG CE-MT1B12-S1 (8 sider) i kategorien Wandstøtte. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om SIIG CE-MT1B12-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Articulating LCD/TV Monitor

Mount - 10" to 27"

Installation Guide

04-0922A

IMPORTANT: If you don't understand the installation

instructions, please consult an installation specialist.

Caution

• Prior to installation of this product, the installation

instructions should be read and completely

understood. The installation instructions must be

read to prevent personal injury and property

damage. Keep these installation instructions in an

easily accessible location for future reference.

• The maximum load capacity is 33lbs (15kg). Use

with products exceeding the maximum load capacity

may cause serious injury. See apparatus instructions.

• Recommended mounting surfaces: wood stud and

solid-flat concrete. If the mount is to be installed on

any surface other than wood studs or solid concrete,

use suitable hardware (not included but

commercially available).

• Do not install on a structure that is prone to vibration,

movement or chance of impact. Failure to do so

could result in damage to the display and/or

damage to the mounting surface.

• Do not install near heater, fireplace, air conditioning,

in direct sunlight or any other heat producing source.

Failure to do so may result in damage to the display

and could increase the risk of fire.

• The wall structure must be capable of supporting at

least five (5) times the maximum load capacity as

indicated. If not, the wall must be reinforced.

• Proper installation procedure by yourself or a

qualified service technician, as outlined in the

installation instructions, must be adhered to. Failure

to do so could result in serious personal injury.

Produkt Specifikationer

Mærke:	SIIG
Kategori:	Wandstøtte
Model:	CE-MT1B12-S1
Brugervejledning:	Ja
Produktfarve:	Sort
Panel montering grænseflade:	50 x 50, 75 x 75, 100 x 100 mm
Monteringstype:	Væg
Bæredygtighedscertifikater:	RoHS
Drejevinkel område:	-135 - 135 °
Hældningsvinkelområde:	-15 - 15 °
Panoreringsområde:	-90 - 90 °
Maksimal vægtkapacitet:	15 kg
Maksimal skærmstørrelse kompatibilitet:	27 "
Antal understøttede skærme:	1
Minimal skærmstørrelse kompatibilitet:	10 "
Montering interface kompatibilitet (min.):	50 x 50 mm
Montering interface kompatibilitet (maks.):	100 x 100 mm