SIIG CE-MT0A12-S1 Manual

SIIG Wandstøtte CE-MT0A12-S1

Læs gratis den danske manual til SIIG CE-MT0A12-S1 (8 sider) i kategorien Wandstøtte. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13 anmeldelser. Har du et spørgsmål om SIIG CE-MT0A12-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

A B C D E F G

(x2) M6X60

bolt

(x2) M6 concrete

anchor

(x4) M6 small

washer

(x2) M6 large

washer

(x4) M4X12

screw

(x4) M5X12

screw

(x4) M6X12

screw

4mm Allen Key 6mm Allen Key

04-0553C

LCD TV/Monitor Tilting Mount - 10" to 26"

Hardware

Installation Instructions

Tools Required: Electronic stud finder, #2 Phillips head screw driver, drill, 1/8" drill bit (wood

stud installation), 3/8" masonry drill bit (concrete/brick wall installation).

Page 1

Figure 1 Figure 2

Step 1: Wall Plate Installation

Hold the wall plate (Figure 2) to the wall, use the two mounting holes to mark the

locations to be used for mounting the wall plate. Locate the holes directly into the

brick, block or concrete, never into the mortar between the blocks.

Pre-drill two holes to a depth of 2" using a 3/8" masonry drill bit at the positions you've

marked and insert one concrete anchor (B) into each hole.

Position the wall plate onto the wall again and insert the bolts (A) and washer (D) into

the anchor as shown (Figure 2) and tighten.

Use a high-quality electronic stud finder (commercially available) to locate dead center

of the wood stud and mark the location with a pencil.

Wood Stud Installation

Concrete/Brick Wall Installation

Attach the wall plate to the wall again and insert the bolts (A) and washers (D) into the

holes (Figure 1) and tighten.

Hold the wall plate (Figure 1) to the wall, use the two mounting holes to mark the

locations to be used for mounting the wall plate.

Take down the wall plate and drill two 2" deep holes, using a 1/8" drill bit at the

positions you've marked.

Page 2

Produkt Specifikationer

Mærke:	SIIG
Kategori:	Wandstøtte
Model:	CE-MT0A12-S1
Produktfarve:	Sort
Panel montering grænseflade:	50 x 50, 75 x 75, 100 x 100 mm
Monteringstype:	Væg
Hældningsvinkelområde:	-45 - 45 °
Kapabilitet:	LCD TV/monitor
Skærmstørrelse kompatibilitet:	10 - 26 "
Maksimal vægtkapacitet:	15 kg
Montering interface kompatibilitet (min.):	50 x 50 mm
Montering interface kompatibilitet (maks.):	100 x 100 mm