SIIG CE-MT0G11-S1 Manual

SIIG Wandstøtte CE-MT0G11-S1

Læs gratis den danske manual til SIIG CE-MT0G11-S1 (8 sider) i kategorien Wandstøtte. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12 anmeldelser. Har du et spørgsmål om SIIG CE-MT0G11-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

04-0659A

TV Size: 36" - 65”

Max load capacity: 132lbs / 60kg

Wall distance: 0.43" / 11mm

Bubble level included

Ultra-Thin LED/LCD TV Mount - 36" to 65"

IMPORTANT: If you don't understand the installation instructions, please consult an installation

specialist

Ultra-Thin LED/LCD TV Wall Mount

Material: 2.0mm Cold Rolled Steel Plate

Installation Instructions

Universal Mounting Pattern

Caution

A F

B G

C H-1 (x4) M6 Washer

(×4) M6×12 screw

(×4) M5×12 screw

(×4) M8×15 screw

H-2 External bubble level

(×4) M8/M6 rectangular

washer

It is recommended that two people perform the installation. Injury and/or damage can result from dropping or

mishandling the display.

INSTALLATION AND OPERATING INSTRUCTIONS

Do not install near heater, fireplace, air conditioning, in direct sunlight, or any other heat producing source. Failure

to do so may result in damage to the display and could increase the risk of fire.

The wall structure must be capable of supporting at least the maximum load capacity as indicated. If not, the wall

must be reinforced. Proper installation procedure by yourself or a qualified service technician, as outlined in the

installation instructions, must be adhered to. Failure to do so could result in serious personal injury.

Recommended mounting surfaces: wood stud and solid-flat concrete. If the mount is to be installed on any

surface other than wood studs or concrete, use suitable hardware (not included but commercially available).

(×4) M6 x 50 bolt

Prior to the installation of this product, the installation instructions should be read and completely understood. The

installation instructions must be read to prevent personal injury and property damage. Keep these installation

instructions in an easily accessible location for future reference.

CAUTION: The maximum load capacity is 132lbs. Use with products exceeding the maximum load capacity may

cause serious injury. See apparatus instructions.

When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, it is

recommended that the wood studs be a minimum of 16" apart.

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result

in damage to the display and/or damage to the mounting surface.

Hardware Kit

(×4) M4×12 screw

(x4) M6 concrete anchor

Produkt Specifikationer

Mærke:	SIIG
Kategori:	Wandstøtte
Model:	CE-MT0G11-S1
Bredde:	855 mm
Dybde:	11 mm
Højde:	480 mm
Produktfarve:	Sort
Panel montering grænseflade:	200 x 200,600 x 400,800 x 400 mm
Monteringstype:	Væg
Kapabilitet:	LCD & LED flat-panel TV
Skærmstørrelse kompatibilitet:	36 - 65 "
Maksimal vægtkapacitet:	60 kg
Vægt (efter britisk standard):	4.5 Pund
Montering interface kompatibilitet (min.):	200 x 200 mm
Montering interface kompatibilitet (maks.):	800 x 400 mm