SIIG CE-MT0812-S1 Manual

SIIG Wandstøtte CE-MT0812-S1

Læs gratis den danske manual til SIIG CE-MT0812-S1 (8 sider) i kategorien Wandstøtte. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om SIIG CE-MT0812-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

04-0541A

TV Size: 32" - 55”

Max load capacity: 121lbs/55kg

Wall distance: 0.43/11mm

Universal Mounting Pattern

Ultra-Thin LED/LCD TV Mount - 32" to 55"

IMPORTANT: If you don't understand the installation instructions, please consult an

installation specialist

Ultra-Thin LED/LCD TV Wall Mount

Material: 2.0mm Cold Rolled Steel Plate

Installation Instructions

Caution

A G

B H

C I

D J

E K

F L

(×4) M8×16 screw

(×4) M6×16 screw

(×4) M8×80 bolt

(×4) M5×35 screw (×4) Concrete anchor

(×4) M8×35 screw (x2) Sponge sticker

(×4) M6×35 screw (×4) M8 spacer

When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, it is

recommended that the wood studs be a minimum of 16" apart.

It is recommended that two people perform the installation. Injury and/or damage can result from dropping or

mishandling the display.

INSTALLATION AND OPERATING INSTRUCTIONS

Do not install near heater, fireplace, air conditioning, in direct sunlight, or any other heat producing source.

Failure to do so may result in damage to the display and could increase the risk of fire.

The wall structure must be capable of supporting at least the maximum load capacity as indicated. If not, the

wall must be reinforced. Proper installation procedure by yourself or a qualified service technician, as outlined in

the installation instructions, must be adhered to. Failure to do so could result in serious personal injury.

Recommended mounting surfaces: wood stud and solid-flat concrete. If the mount is to be installed on any

surface other than wood studs or concrete, use suitable hardware (not included but commercially available).

Prior to the installation of this product, the installation instructions should be read and completely understood.

The installation instructions must be read to prevent personal injury and property damage. Keep these

installation instructions in an easily accessible location for future reference.

CAUTION: The maximum load capacity is 121 lbs. Use with products exceeding the maximum load capacity may

cause serious injury. See apparatus instructions.

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could

result in damage to the display and/or damage to the mounting surface.

Hardware Kit

(×4) M5×16 screw (×4) M6 washer

(x4) M5 washer

Produkt Specifikationer

Mærke:	SIIG
Kategori:	Wandstøtte
Model:	CE-MT0812-S1
Bredde:	750 mm
Dybde:	11 mm
Højde:	545 mm
Produktfarve:	Sort
Panel montering grænseflade:	200 x 100,200 x 200,600 x 200,600 x 400 mm
Husmateriale:	Stål
Certificering:	UL
Monteringstype:	Væg
Kapabilitet:	LED/LCD TV
Skærmstørrelse kompatibilitet:	32 - 55 "
Maksimal vægtkapacitet:	60 kg
Montering interface kompatibilitet (min.):	200 x 100 mm
Montering interface kompatibilitet (maks.):	600 x 400 mm