SIIG CE-MT0J11-S1 Manual

SIIG Wandstøtte CE-MT0J11-S1

Læs gratis den danske manual til SIIG CE-MT0J11-S1 (8 sider) i kategorien Wandstøtte. Denne vejledning er vurderet som hjælpsom af 69 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 35 anmeldelser. Har du et spørgsmål om SIIG CE-MT0J11-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

04-0661

Installation Instructions

Wall distance: 1.38" / 35mm

Bubble level included

Low Profile Universal TV Mount - 42" to 70"

IMPORTANT: If you don't understand the installation instructions, please consult an installation

specialist

Fixed Flat-Panel TV Wall Mount

Universal Mounting Pattern

Material: 2.0mm Cold Rolled Steel Plate

TV Size: 42" - 70"

Max load capacity: 165lbs / 75kgs

A1 D (×4) M8/M6 rectangular washer

A2 E (×6) M8x50 bolt

B1 F (×6) M8 concrete anchor

B2 G1 (x6) M8 washer

C1 G2 External bubble level

C2 H

Do not install near heater, fireplace, air conditioning, in direct sunlight, or any other heat producing source. Failure to do

so may result in damage to the display and could increase the risk of fire.

INSTALLATION AND OPERATING INSTRUCTIONS

CAUTION: The maximum load capacity is 165lbs. Use with products exceeding the maximum load capacity may cause

serious injury. See apparatus instructions.

It is recommended that two people perform the installation. Injury and/or damage can result from dropping or

mishandling the display.

(×4) M6×12 screw

(×4) M8×15 screw

Recommended mounting surfaces: wood stud and solid-flat concrete. If the mount is to be installed on any surface

other than wood studs, use suitable hardware (not included but commercially available).

Prior to the installation of this product, the installation instructions should be read and completely understood. The

installation instructions must be read to prevent personal injury and property damage. Keep these installation

instructions in an easily accessible location for future reference.

When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, it is

recommended that the wood studs be a minimum of 16" apart.

Caution

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in

damage to the display and/or damage to the mounting surface.

The wall structure must be capable of supporting at least the maximum load capacity as indicated. If not, the wall must

be reinforced. Proper installation procedure by yourself or a qualified service technician, as outlined in the installation

instructions, must be adhered to. Failure to do so could result in serious personal injury.

Hardware kit:

(×4) M5×30 screw

(×4) M8×30 screw

(×4) M6×30 screw

(×4) Spacer

(×4) M5×12 screw

Produkt Specifikationer

Mærke:	SIIG
Kategori:	Wandstøtte
Model:	CE-MT0J11-S1
Bredde:	910 mm
Dybde:	36 mm
Højde:	635 mm
Vægt:	3300 g
Produktfarve:	Sort
Panel montering grænseflade:	200 x 100,200 x 200,600 x 200,600 x 400,800 x 400 mm
Husmateriale:	Metal
Monteringstype:	Væg
Kapabilitet:	LCD/plasma
Maksimal vægtkapacitet:	75 kg
Montering interface kompatibilitet (min.):	200 x 100 mm
Montering interface kompatibilitet (maks.):	800 x 400 mm