SolidDrive MSK-1G-T Manual


Læs gratis den danske manual til SolidDrive MSK-1G-T (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om SolidDrive MSK-1G-T, eller vil du spørge andre brugere om produktet?

Side 1/4
System Type
Direct drive for sound masking
Sensitivity dB @ 2.83V/1M
69 dB
10
Sensitivity dB @ 1W/1M
2
69 dB
10
Frequency Response (- 3 dB)
3
90 Hz - 10 kHz
3
80 Hz - 15 kHz
Max. Program Power
4
50 w
Max. Continuous Power RMS
5
30 w
Max. Power SPL @ 1 M
6
86 dB (drywall)
Coverage Angle (-6 dB @ 2 kHz)
12
Coverage Angle (-6 dB @ 10 kHz)
12
Enclosure Material
Titanium adonized aluminum
Grille
N/A
Inputs
Plenum rated wire lead with screw connector block
Colors
Titanium
Height
120.65 mm | 4.75 in
Diameter
58.42 mm | 2.30 in
Weight
0.68 kg | 1.5 lbs
Accessories
Conduit Clamp
Optional
Titanium Heat Sink (SD1-HS-TI)|12 On-Center Bracket Assembly
(SD1-BR12)|16” On-Center Rear-Install Drywall Bracket assembly
for SolidDrive (SD1-BR16-R)|16On-Center Bracket Assembly
(SD1-BR16)|24On-Center Bracket Assembly (SD1-BR24)|Passive
Equalization Module - Drywall (PEM-DW)
Packaging
1 per box
Regulatory - CE
Approved
Regulatory - UL
UL 1480A & 2043 approved
RoHS
Approved
Notes:
2 1w1m sensitivity determined using nominal impedence
3 Frequency response measured in half or full space as dictated by speaker mounting conguration
4 Max program power is 3 dB above max continuous power
5 Continuous power rating EIA-426-B test
6 Max output based on max continuous power
10 Equivalent to conventional in-wall @ 4m
Description
The MSK-1-T by SolidDrive is an economical hidden
planar-source sound transducer designed for sound
masking on drywall, glass and wood. Featuring a rugged
aluminum enclosure with neodymium magnets, the
MSK-1 uses technology similar to our patented SD1
transducers to transfer acoustic energy to the substrate.
The result is extremely wide and even audio coverage and
acoustical uniformity in the listening space.
Key Features
Hidden planar-source audio technology evenly
distributes sound masking signals throughout the
listening space.
• Broad and even coverage of up to 15 feet per unit in a
drywall installation means a few units cover a large area.
• Proprietary behind-surface mounting technologies
ensure maximum visual appeal.
• 86 Max SPL (drywall) and 120° dispersion pattern
across the upper registers of the frequency spectrum.
• Drywall optional accessories: self-leveling, constant
tension pre-construction bracket to ensure proper
alignment & wall contact.
• incorporates a 10 watt transformer for use in
70 V installations
• SolidDrives operate in a virtually friction-free
environment and are engineered for innite life.
SolidDrives come with an industry-leading 7-year
warranty.
MSK-1-T PRODUCT SPECIFICATIONS
SolidDrive MSK-1-T Series
MSK-1-T | MSK-1sm-T | MSK-1g-T
Commercial Applications
MSK-1 by SolidDrive technology allows for high
quality sound through drywall surfaces in either in-wall
or in-ceiling installations. Applications include any sound
masking installation in ceilings or walls that requires a
hidden speaker solution. With planar-source technology,
the location of the SolidDrive on the surface has no impact
on the quality or uniformity of the delivered sound eld
and each unit provides coverage over a large area. For
improved bass response, SolidDrive IW200 (dual 8 inch)
or IW210 (dual 10 inch) subwoofers can be included.
SoundTube
®
13720 W. 109th St.
Lenexa, KS 66215
Phone: 913.663.5600
Fax: 913.663.3200
Toll Free: 855.663.5600
www.soundtube.com
All SoundTube speakers come with a 7-year
limited warranty.
SolidDrive EQ Modules
The surface material plays a key role in the
system’s sound performance. To ensure an optimal
listening experience, the MSK-1 system can be equalized
with the optional SolidDrive Passive Equalization Module
(Not UL approved). The PEM increases the system’s
sound performance with a passive equalizer network
specically engineered for sheetrock. One module is used
with each SolidDrive.
Patented Technologies
The MSE Audio Group constantly develop new
technologies which enhance audio product performance.
MSE Audio innovations are protected by multiple U.S.
and international patents. The MSE Audio Group actively
defends its patents in order to protect SoundTube
resellers and end-users.
Technical Data and Specication Tools
Technical Data
MSE Audio strives to provide complete and effective
technical information and data to dealers, engineers and
designers. All data are available from MSE Audio or www.
mseaudio.com.
Technical data and downloads include:
Tech Sheets – Technical information and architectural
specs for system engineers
Independant Data Acquisition and Verication
All data for MSE Audio speakers are collected and
veried by an independent third party testing laboratory.
All data are collected and analyzed according to ASTM,
ISO and AES standards using EASERA, TEF and MLSSA.
Full balloon data including both phase and magnitude
are compiled into a variety of formats including EASE 4.x,
GLL and CLF.
Architectural Specications
The loudspeaker shall consist of a full-range
transducer constructed with neodymium magnets in an
adonized titanium enclosure.
Performance specications are dependent upon substrate
type and size. Typical production unit specications are as
follows: Useable frequency response shall extend from 70
Hz – 15 kHz (-10 dB, ½ space, no external equalization).
Measured sensitivity (2.83 Volt input, 1 meter) shall be at
least 69.0 dB (drywall tested). The speaker shall have a
nominal impedance of 8 Ohms and rated power capacity
shall be at least 30 Watts RMS. The max. SPL shall be
86.0 dB (drywall tested).
Installation for the SolidDrive shall include galvanized
steel pre-construction bracket for drywall.
Overall cabinet dimensions for the Private Sound shall be
no more than 52.8mm (2.08 in) in height by 88.9 mm
(3.50 in) in diameter. The SD-1s shall weigh no more
than 0.50 kg or 1.2 Lbs.
SolidDrive models shall come with plenum rated speaker
wire with screw connector block
90.0
80.0
dB
70.0
60.0
50.0
40.0
20 100 1K
10K
Hz
20K
-180.0
-108.0
-36.0
36.0
108.0
Deg
180.0
3 Band EQ
no EQ
Frequency Response Typical Dry-wall SolidDrive Response
90.0
80.0
dB
70.0
60.0
50.0
40.0
20 100 1K
10K
Hz
20K
-180.0
-108.0
-36.0
36.0
108.0
Deg
180.0
3 Band EQ
no EQ
Frequency Response Typical Wood Table-Top SolidDrive Response
100.0
90.0
dB
80.0
70.0
60.0
50.0
20 100 1K
10K
Hz
20K
-180.0
-108.0
-36.0
36.0
108.0
Deg
180.0
no EQ
Frequency Response Typical Glass SolidDrive Response
SolidDrive MSK-1-T Series
MSK-1-T | MSK-1sm-T | MSK-1g-T


Produkt Specifikationer

Mærke: SolidDrive
Kategori: Ikke kategoriseret
Model: MSK-1G-T

Har du brug for hjælp?

Hvis du har brug for hjælp til SolidDrive MSK-1G-T stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret SolidDrive Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer