StarTech.com ST1000SPEXD4 Manual


Læs gratis den danske manual til StarTech.com ST1000SPEXD4 (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om StarTech.com ST1000SPEXD4, eller vil du spørge andre brugere om produktet?

Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 15, 2022
Product Diagram (ST1000SPEXD4)
Port/LED/Connector Function
1 Bracket Both Low-Prole and Full-Height Brackets are included
2
Link/Activity LED
Indicators
Link/Activity
Solid Green: Link/cable detected
Flashing Green: Data transmission
O: No link/cable detected
Gigabit
Solid Yellow: 1000 Mbps (Gigabit) Link detected
O: 10/100 Mbps Link or No link detected
3 2x Ethernet Port
Used to connect a Network Cable to the Network
Card
4 PCIe p1-x1 Connector Insert into a PCI Express Slot
Requirements
For the latest requirements, please visit www.startech.com/ST1000SPEXD4
Computer with an available PCI Express Slot (x1, x4, x8, or x16)
Package Contents
PCIe Network Card x 1
Low-Prole Bracket x 1
Quick-Start Guide x 1
2 Port PCI Express Gigabit Ethernet Network Card
Installation
Install the PCI Express Card
WARNING!
PCI Express Cards can be severely damaged by static electricity. Make sure that
you are properly grounded before you open your Computer Case or touch the PCI
Express Card. You should wear an Anti-Static Strap when you install any computer
component. If an Anti-Static Strap isn’t available, discharge any built-up static
electricity by touching a large Grounded Metal Surface for several seconds. Only
handle the PCI Express Card by its edges and don’t touch the gold connectors.
1. Turn o your Computer and any Peripheral Devices that are connected to it (for
example, Printers, External Hard Drives, etc.).
2. Unplug the Power Cable from the back of your Computer.
3. Disconnect any Peripheral Devices that are connected to your Computer.
4. Remove the Cover from your Computer Case. Consult the documentation that
came with your Computer for details about how to do this safely.
5. Locate an open PCI Express Slot and remove the corresponding Slot Cover Plate
from the back of your Computer Case. Consult the documentation that came with
your Computer for details about how to do this safely. This card works in PCI Express
x1, x4, x8, or x16 slots.
6. Gently insert the PCI Express Card into the open PCI Express Slot and fasten the
Bracket to the back of the Computer Case.
Note: If you install the PCI Express Card into a Small Form Factor or a Low-Prole
Desktop System, it may be necessary to replace the pre-installed standard Full-
Height Bracket with the included Low-Prole Bracket.
7. Return the Cover back onto your Computer Case.
8. Reconnect the Power Cable to the back of your Computer.
9. Reconnect all of the Peripheral Devices that were disconnected in step 3.
10. Turn on your Computer and Peripheral Devices.
Install the Driver
1. On your Computer, open an Internet Browser and navigate to
www.startech.com/ST1000SPEXD4
2. Click the Drivers & Downloads tab.
3. Under Driver(s), download the Driver for your operating system.
1
3
4
2
1


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Netværkskort/adapter
Model: ST1000SPEXD4
Bredde: 18 mm
Dybde: 92.6 mm
Højde: 120 mm
Vægt: 51 g
Brugervejledning: Ja
Pakkevægt: 142 g
Pakkedybde: 143 mm
Pakkebredde: 170 mm
Pakkehøjde: 30 mm
Opbevaringstemperatur (T-T): 0 - 100 °C
Relativ luftfugtighed ved drift (H-H): 10 - 90 %
Ethernet LAN-porte (RJ-45): 2
Ethernet LAN: Ja
Driftstemperatur (T-T): 0 - 70 °C
Forbindelsesteknologi: Ledningsført
Certificering: CE, FCC
Kabelteknologi: 10/100/1000BaseT(X)
Netværksstandarder: IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
LED-indikatorer: Activity, Link
Harmoniseret systemkode (HS): 85176990
Bæredygtighedscertifikater: RoHS
Understøttede Mac-operativsystemer: Mac OS X 10.10 Yosemite, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Understøttede Linux-operativsystemer: Ja
Værtsgrænseflade: PCI Express
Grænseflade: Ethernet
Intern: Ja
Maksimal dataoverførselshastighed: 2000 Mbit/s
Drivere inkluderet: Ja
Fuld duplex: Ja
Ethernet-grænsefladetype: Gigabit Ethernet
Understøttede operativsystemer til servere: Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Flowkontrol support: Ja
Jumbo Frames support: Ja
Jumbo rammer: 9000
Auto MDIX IEEE: Ja
Wake-on-LAN klar: Ja
VLAN mærkning: Ja
Simpelt beslag: Ja
Chipsæt: Realtek - RTL8111E, Asmedia - ASM1182E
PCI version: 2.0

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com ST1000SPEXD4 stil et spørgsmål nedenfor, og andre brugere vil svare dig