Wavtech Link1000.1mini Manual

Wavtech Modtager Link1000.1mini

Læs gratis den danske manual til Wavtech Link1000.1mini (8 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Wavtech Link1000.1mini, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
www.wavtech-usa.com
Owner’s Manual
1000W RMS Mono Amplifier
link1000.1mini
1
•
DO NOT DRIVE WHILE DISTRACTED. Any function that requires your prolonged attention should not be
performed while driving. Always stop the vehicle in a safe location before performing any such function. Failure
•
KEEP THE VOLUME AT MODERATE LEVELS WHILE DRIVING. Excess volume levels can obscure sounds such
as emergency vehicle sirens or road warning signals and may result in an accident. Continuous exposure to high
sound pressure levels may cause permanent hearing loss. Use common sense and practice safe sound.
•
FOR USE WITH 12V NEGATIVE GROUND VEHICLE APPLICATIONS ONLY. Using this product other than in its
designed application may result in fire, injury or product damage.
•
MAKE THE CORRECT WIRING CONNECTIONS AND USE PROPER FUSE PROTECTION. Failure to connect
wiring correctly with appropriate gauge and fuse protection may result in fire, injury or product damage . When
replacing fuse(s), never exceed the specified rating. Ensure proper protection of all system power wiring and
install an external fuse (not included) with specified rating for each amplifier connected with the +12V lead at
the battery terminal.
•
DISCONNECT THE NEGATIVE BATTERY TERMINAL BEFORE INSTALLATION. Failure to do so may result in
fire, injury or damage to the unit.
•
D O NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables
to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as steering
wheel, brake pedals, etc. can be extremely hazardous.
•
DO NOT DAMAGE VEHICLE SYSTEMS OR WIRING WHEN DRILLING HOLES. When drilling holes in the
chassis for installation, take precautions so as not to contact, puncture or obstruct brake lines, fuel lines, fuel
tanks, electrical wiring, etc. Failure to take such precautions may result in fire or an accident.
•
DO NOT UTILIZE OR CONNECT TO ANY PART OF VEHICLE SAFETY SYSTEMS. Bolts, nuts or wires used in
the brake, airbag, steering or any other safety-related systems or fuel tanks should NEVER be used for
mounting, power or ground connections. Using such parts may disable control of the vehicle or result in fire.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury or death.
CAUTION
•
STOP USE IMMEDIATELY IF A PROBLEM OCCURS. Failure to do so may result in personal injury or damage to
the product. Return it to your authorized Wāvtech dealer.
•
HAVE AN EXPERT DO THE WIRING AND INSTALLATION. This unit requires special technical skill and
experience for wiring and installation. To insure safety and proper function, always contact the authorized
dealer where you purchased the product to have it done professionally.
•
INSTALL THE UNIT SECURELY WITH SPECIFIED PARTS. Be sure to use only the included parts and specified
installation accessories (not included). Use of other than designated parts may damage this unit. Install the
unit securely so that it will not come loose during a collision or sudden jolt.
•
ROUTE WIRING AWAY FROM SHARP EDGES AND MOVING PARTS. Arrange cables and wiring away from
sharp or pointed edges and avoid moving parts such as seat hinges or rails to prevent pinching or wear. Use
loom protection where appropriate and always use a grommet for any wiring routed through metal.
•
NEVER RUN SYSTEM WIRING OUTSIDE OR UNDERNEATH THE VEHICLE. All wiring must be routed, secured
and protected inside the vehicle. Failure to do so may result in fire, injury or property damage.
•
INSTALL THE UNIT IN A DRY AND VENTILATED LOCATION. Avoid mounting locations where the unit will
likely be exposed to high moisture or heat without adequate ventilation. Moisture penetration or heat buildup
may result in product failure. Always make sure the amplifier chassis temperature is safe before touching it.
•
REDUCE GAIN AND SOURCE VOLUME TO MINIMUM LEVELS FOR INITIAL SYSTEM TUNING. Ensure
amplifier power is off before connecting signal cables and follow proper system gain setting procedures.
Failure to do so may result in damage to the amplifier and/or connected speakers.
WARNING
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or property damages.
Package Contents: Accessories Required for
Installation (not included):
ŸRCA Cables or Signal Wire
ŸPower Supply & Speaker Wire
ŸIn-line Fuse Holder w/100A Fuse
ŸBattery Ring Terminal
ŸChassis Ground Terminal
ŸWire Crimp Connectors
ŸGrommets & Loom
Mounting Tabs
(pre-attached)
Spk Level
Input Terminal
Main Unit
Hex Wrenches
Mounting Screws

Produkt Specifikationer

Mærke: Wavtech
Kategori: Modtager
Model: Link1000.1mini

Har du brug for hjælp?

Hvis du har brug for hjælp til Wavtech Link1000.1mini stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Wavtech Manualer

Wavtech

Wavtech link500.4mini Manual

16 August 2025
Wavtech

Wavtech Link1000.1mini Manual

16 August 2025
Wavtech

Wavtech link700.4plus Manual

13 Januar 2025
Wavtech

Wavtech Link1000.5plus Manual

1 Januar 2025
Wavtech

Wavtech Link300.4 mini Manual

27 August 2024
Wavtech

Wavtech Link500.1 mini Manual

27 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Sound Ordnance

Sound Ordnance M350-1 Manual

16 August 2025
Yamaha

Yamaha MusicCast RX-A1080 Manual

16 August 2025
Yamaha

Yamaha MusicCast RX-A3080 Manual

16 August 2025
Klipsch

Klipsch TX-NR7100 Manual

16 August 2025
Luxman

Luxman L-505uX Manual

16 August 2025
Yamaha

Yamaha XMV4140-D Manual

16 August 2025
Yamaha

Yamaha TSR-7850 Manual

16 August 2025
Yamaha

Yamaha RX-V871 Manual

16 August 2025
Hertz

Hertz Dieci DP 4.400 Manual

15 August 2025
Yamaha

Yamaha MusicCast RX-A2070 Manual

15 August 2025