Winegard HD7084 Manual

Winegard TV antenne HD7084

Læs gratis den danske manual til Winegard HD7084 (2 sider) i kategorien TV antenne. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Winegard HD7084, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

INSTRUCTIONS

VHF/UHF MODELS

HD7084P & HD8200P

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000

Printed in U.S.A. © Winegard Company 2002 1450168 Rev. 9/02

90 DAY LIMITED WARRANTY

Winegard Company warrants this Winegard product against any defects in

materials or workmanship within 90 (ninety) days from date of purchase. No warranty

claim will be honored unless at the time the claim is made, you present proof of

purchase to an authorized Winegard dealer (if unknown, please contact Winegard

Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, Telephone 319-754-

0600).

Winegard Company (at its option) will either repair or replace the defective product

at no charge to you. This warranty covers parts, but does not cover any costs incurred

in removal, shipping or reinstallation of the product. This limited warranty does not apply

if the product is damaged, deteriorates, malfunctions or fails from: misuse, improper

installation, abuse, neglect, accident, tampering, modification of the product as originally

manufactured by Winegard, usage not in accordance with product instructions or acts

of nature such as damage caused by wind, lightning, ice or corrosive environments such

as salt spray and acid rain.

The 90 Day Warranty is provided on the condition that the equipment is properly

delivered with all handling and freight charges prepaid to your Winegard dealer for

return to our factory for repair or replacement. Winegard dealers will arrange for the

replacement or repair and return to you without charge the product which failed due to

defective material or workmanship.

WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER

WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.

ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY

INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND

MERCHANTABILITY ARE LIMITED TO THE 90-DAY PERIOD OF THIS WAR-

RANTY.

The foregoing shall be the sole and exclusive remedy of any person, whether in

contract, tort or otherwise, and Winegard shall not be liable for incidental or conse-

quential damage or commercial loss, or from any other loss or damage except as set

forth above.

Some states do not allow limitations on how long an implied warranty lasts, or the

exclusion of limitation of incidental or consequential damages, so the above limitations

or exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights

which vary from state to state.

NOTE

To prevent damage in shipping, the second set of elements from the rear of the boom

are folded to the reverse side. You can identify these elements by the tags attached

to them. Follow the directions on the tags carefully.

High Definition (HD) Platinum

Antennas

WARNING

INSTALLATION OF THIS ANTENNA NEAR POWER LINES IS DANGEROUS.

FOR YOUR SAFETY, FOLLOW THE INSTALLATION INSTRUCTIONS.

VHF/UHF

MODEL HD7084P

VHF/UHF

MODEL HD8200P

STEP 1. Remove the rear

section of the antenna from

the carton (the rear section

has the longer elements).

Unfold elements approxi-

mately 30 degrees.

STEP 2. Grasp both sides of

the second element from the

rear of the boom. Lift the

ends of the element just

enough to slide over the other

elements to the front and rear

and ROTATE ABOUT 90°

COUNTER CLOCKWISE.

See Figure 1.

STEP 3. Spread all the

elements to the lock position,

being sure to alternate the

elements. See Figure 2.

STEP 4. Turn the antenna

over and repeat steps one (1)

through three (3).

STEP 5. Unfold the elements of the front

section of the antenna. Remove the bolt and

hex nut, from the tapered end of the front

boom and slide the tapered end into the front

of the rear boom. Cartridge housing on rear

section should be on the bottom of the rear

boom. Replace the bolt, and hex nut. Tighten

securely. See Figure 3.

STEP 6. Unfold UHF directors, as shown in

Figure 4.

STEP 7. Unfold the elements on the reflector

booms.Then unfold the reflector booms slowly

until they lock into place. See Figure 5.

NOTE: On HD-8200P reflector booms must

be attached. See Figure 5A.

STEP 8. To install the boom brace

remove the bolts and hex nuts. Attach the

boom brace to the reflector boom first,

making sure that the mast clamps are on

the same side, see Figure 6. Do not tighten

the bolt and hex nut.

Fig. 7

Fig. 8

Fig. 9

STEP 10. To attach the cartridge housing

to the antenna, align the snaps on the

cartridge housing with the snap holes on

the cartridge housing receptacle on the

antenna and push the housing into the

receptacle until it snaps into place. See

Figure 7.

STEP 11. Attach the 75 ohm coaxial cable

to the cartridge housing. See Figure 7.

Slide weather boot over connector and

boot collar.

STEP 12. To mount the antenna on the

mast, loosen nuts on the main boom and

boom brace mast clamps. Slide both mast

clamps over the mast pointing the front of

the antenna (small end) towards stations

and tighten the boom brace mast clamp

securely. Let the main boom mast clamp

slide down the mast until the boom brace

supports the main boom. Tighten the main

boom mast clamp securely. See Figure 8.

STEP 13. The 75 ohm coaxial cable

downlead may be secured to the mast by

either taping it or use of plastic wire ties.

HOW TO PROVIDE LIGHTNING

PROTECTION FOR TV ANTENNA

AND SET

Step 1. Mount the lightning arrestor as

close as possible to where the 75 ohm

coaxial cable (lead-in) enters the house.

See Figure 9.

Step 2. The ground wires for both the

mast and the lead-in should be copper or

aluminum wire, number eight (8) or larger.

See Figure 9.

Step 3. The lead-in wire from the antenna

to the lightning arrestor and the mast

ground wire should be secured to the

house, spaced from four (4) or six (6)

feet apart. See Figure 9.

NOTE: In the case of a “ground up”

antenna installation, it may not be

necessary to ground the mast if the mast

extends four or moure feet into the earth.

Consult a TV serviceman for the proper

depth in your location.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

STEP 9. Swing the boom brace down onto the

main boom and insert the bolt and hex nut,

see Figure 6. Tighten both bolts and hex nuts

securely.

Fig. 6

Antenna Lead

In Wire

Ground

Clamp

Electric

Service

Equipment

Antenna

Discharge Unit

(NEC Section 810-20)

Power Service Groundin

Electrode System

(NEC Art 250, Part H)

Ground

Clamps

Groundin

Conductors

(NEC Section 810-21)

NEC - National Electrical Code

Example of antenna grounding as per

National Electrical Code, ANSI/NFPA 70

MASTING

MAST CLAMP

INSERT

HEX NUT

U-BOLT

Fig. 5A

Produkt Specifikationer

Mærke:	Winegard
Kategori:	TV antenne
Model:	HD7084

Har du brug for hjælp?

Hvis du har brug for hjælp til Winegard HD7084 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

TV antenne Winegard Manualer

Winegard DS-3101 Manual

5 Juli 2025

Winegard Prostar PR-5646 Manual

5 Juli 2025

Winegard HD7082 Manual

5 Juli 2025

Winegard Playmaker Manual

27 August 2024

Winegard TRAV'LER SK-7002 Manual

27 August 2024

Winegard Sensar III GS-2200 Manual

27 August 2024

Winegard FL5500A Manual

27 August 2024

Winegard TRAV'LER SKA-733 Manual

27 August 2024

Winegard SK-3005 Manual

27 August 2024

Winegard SquareShooter SS-2000 Manual

27 August 2024

TV antenne Manualer

Nyeste TV antenne Manualer

Philips SDV4310 Manual

15 August 2025

Philips SBCTT250 Manual

14 August 2025

Philips SDV5229 Manual

14 August 2025

One For All SV 9386 Manual

12 August 2025

Samsung LA46B650T1R Manual

10 August 2025

RCA ANTB55EV Manual

1 August 2025

Emos J0806 Manual

1 August 2025

Emos J0690 Manual

31 Juli 2025

One For All SV9143 Manual

26 Juli 2025

Metronic 416961 Manual

8 Juli 2025