CDN DTP392 Manual

CDN Termometer DTP392

Læs gratis den danske manual til CDN DTP392 (3 sider) i kategorien Termometer. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 14 anmeldelser. Har du et spørgsmål om CDN DTP392, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Perfect For

• Roasts & other meats

• Candy making & deep fry

Easy To Use

• Instant readout of internal food temperature

during cooking

• Audio/visual alert sounds when set temperature

is reached

Features

• 5.5"/14 cm probe

• 3'/91 cm sensor cable

• Shatterproof

• Dual progress display

• Big digit

• Food-safe ABS plastic case

• Stainless steel probe

• Sliding mode switch

• Temperature guide

• 2-way mounting: magnet/stand

• Adjustable stainless steel clip

• Battery and instructions included

Get Professional Results

Every Time!

Perfect for roasting or grilling. Simply insert the

probe into the food. Place the food in the oven or

barbecue and close the oven door (or grill cover)

directly over the sensor cable. Set the temperature

alert for USDA safe cooking temperatures.

Both the set and actual temperatures are displayed

during cooking.

Note: Remove sticker from display before use.

Note: In the following instructions, names of the control

buttons are shown in CAPS. Function information that appears

on the display is shown in .BOLD CAPS

Battery Installation

Replace battery when LCD becomes dim or alert

level declines.

1. Remove battery cover on the back by sliding it

in the direction of the arrow.

2. Install one 1.5V AAA battery observing polarity

shown in compartment. A brief alarm sounds.

3. Replace the battery cover until it clicks shut.

4. will be displayed under LO COOKING TEMP

when the probe/sensor cable is disconnected

or malfunctions.

Operating Instructions

A. Temperature Scale

Slide switch to °F or °C on the back of the case

to select temperature reading in Fahrenheit

or Celsius.

B. Temperature Alert

1. Slide alert switch on the left side of the case

to ON to turn the audio/visual alert on.

2. Insert the probe at least 1" (2.5 cm) into the

meat; making sure that it is not inserted into

a fatty deposit.

3. Gently close the oven door on the sensor cable

and insert the plug into the jack on the right

side of the case.

Model: DTP392

Probe Thermometer

32 to 392°F/0 to 200°C

 







  

  



















 

4. Press the UP or DOWN button to set the

desired temperature under ALERT TEMP.

5. The alert sounds when the cooking temperature

reaches the alert temperature.

6. Press STOP to stop the alert.

C. Candy Thermometer

1. As a matter of safety, always position the

probe on the pot before lling it and/or

applying heat.

2. Insert the probe through both holes

in the attachment clip. Press the top

portion of the clip together for easier

sliding up the probe.

3. Push the clip down onto the side of

the pot and position it until the probe tip is just

above the bottom. Do not let the tip touch the

bottom of the pot.

Important: Keep sensor cable away from direct heat of

the cooktop burner — wires inside the cable may become

damaged.

4. Set the alert temperature as described in . B4

Candy temperatures are listed here for

easy reference.

Note: Clean the thermometer probe before each use.

Important: DO NOT LEAVE THERMOMETER CASE IN

HOT OVEN. IT IS NOT HEAT RESISTANT. DO NOT USE

PROBE IN MICROWAVE OVENS.

Tip:

Meat should be allowed to “rest” for 10 to 15 minutes after

it is removed from oven. This allows time for the meat’s internal

temperature to stabilize and the juices to redistribute. This will

result in a roast that is both juicier and easier to carve.

Precautions

• Always wear a heat resistant glove to touch the

stainless steel probe or sensor cable during or just

after cooking.

Do not touch with bare hands.

• Keep the battery, stainless steel probe and sensor

cable away from children.

• Clean the probe and dry thoroughly after use.

• Do not clean the case with abrasive or corrosive

compound, which may scratch the plastic and

corrode the electronic circuits.

• Do not subject the unit to excessive force shock,

dust, temperature or humidity, which may result in

malfunction, shorter electronic life span, damaged

battery and distorted parts.

• Do not tamper with the unit’s internal components.

Doing so will invalidated the warranty on the unit

and may cause unnecessary battery damage and

distorted parts.

• Do not subject the unit to excessive exposure to

direct sunlight. — do The unit is not waterproof

not immerse it into water or expose to heavy rain.

• Do not expose the sensor cable plug or the jack on

the case to water or any liquid, which will result in

a bad connection and faulty readings.

• To avoid deformation, do not place the unit in

extreme temperatures. Never burn the probe

directly over the re. Do not use the probe when

the temperature is above 392°F/200°C. Doing so

will deteriorate the wire.

• Do not use the probe in a microwave oven.

• Always read the users manual thoroughly

before operating.

Specications

Temperature Alert: 32 to 392°F/0 to +200°C;

°F/°C selectable

Power: 1 DC 1.5V AAA Alkaline

battery

CANDY TEMPERATURE GUIDE

Jelly . . . . . . . . . . . . . . 220°F . . . . . . 104°C

Thread . . . . . . . 230–234°F . . .110–112°C

Soft Ball . . . . . .234–240°F . . .112–115°C

Firm Ball . . . . .244–248°F . . 118–120°C

Hard Ball . . . . . 250–266°F . . .121–130°C

Soft Crack . . . . . 270–290°F . . .132–143°C

Hard Crack . . . . 300–310°F . . 149–154°C

Caramelize . . . . 316–338°F . . 158–170°C

OIL TEMPERATURE GUIDE

325–375°F/163-190°C is the normal desired

temperature for deep fry cooking.

Note: When food is added to hot oil, the temperature of the oil

immediately drops at least 50°F/28°C. You will need to bring

the oil temperature back to the desired cooking temperature.

Frying at lower temperatures results in lighter color, less

avor development and increased oil absorption.

Note: During the electrostatic discharge, the device may

malfunction. Please press any key to return to normal

operation.

Produkt Specifikationer

Mærke:	CDN
Kategori:	Termometer
Model:	DTP392

Har du brug for hjælp?

Hvis du har brug for hjælp til CDN DTP392 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termometer CDN Manualer

15 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

13 Juni 2025

13 Juni 2025

CDN ProAccurate FG80 Manual

12 Juni 2025

CDN ProAccurate RFT1 Manual

12 Juni 2025

Termometer Manualer

Nyeste Termometer Manualer

Emos EGS0102 Manual

1 August 2025

Braun Sensian 3 BNT050 Manual

24 Juli 2025

Milwaukee Temp-Gun 2268-20 Manual

22 Juli 2025

Milwaukee Temp-Gun 2267-20 Manual

22 Juli 2025

Alecto BT5 Manual

21 Juli 2025

Steinberg SBS-IR-1300-16 Manual

19 Juli 2025

Comelec TN400 Manual

18 Juli 2025

Sauter JIT 200 Manual

17 Juli 2025

Laica TH1004 Manual

16 Juli 2025

Inkbird ITH-13-B Manual

16 Juli 2025