CDN IN1022 Manual

CDN Termometer IN1022

Læs gratis den danske manual til CDN IN1022 (5 sider) i kategorien Termometer. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om CDN IN1022, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Perfect For

•Non-contactsurfacetemperatures

Easy To Use

•1-secondresponse

•8-beamlasertargetillumination

•Backlit

•Data-hold

•One-buttonoperation

Features

•Shatterproof

•Memory

•Maximum,minimum,difference,averagewithlockfor

continuousscanning

•Highandlowalerts

•Distance:spot=12:1

•Batterystatusindication

•ABSplastic

•Auto-off

•Batteriesandinstructionsincluded

Get Professional Results

Every Time!

Monitoringtemperatureisessentialtokeepingfood

safe.TheversatileIN1022isperfectforanyapplication.

Simplypointtheinfraredsensorlenstowardthetarget

andpressthetriggertogetaquickreadingofsurface

temperatures.

Maximum, Minimum, Difference

and Average Modes

TheIN1022alsooffersMaximum,Minimum,Difference

andAveragemodes.Maximummodedisplaysthehighest

temperatureamongmultipletargets.Minimummode

displaysthelowesttemperatureamongmultipletargets.

Differencemodedisplaysthedifferencebetweenthe

maximumandminimumtemperaturemeasurements

ofmultipletargets.WhileAveragemodedisplaysthe

averagetemperaturemeasurementsofmultipletargets.

Lock Mode

Lockmodecontinuouslymeasuresthetemperature

forupto60minutes.Thisisparticularlyusefulfor

continuoustemperaturemonitoring.

High and Low Alerts

TheIN1022providesaprogrammablehighandlowalert

formeasurementsthatareoutofthedesiredrange.

Note:Removestickerfromdisplaybeforeuse.

Note:Inthefollowinginstructions,namesofthecontrol

buttonsareshowninCAPS.Functioninformationthatappears

onthedisplayisshowninBOLD CAPS.

Battery Installation

ReplacebatterywhenLCDbecomesdimoralarm

leveldeclines.Powerofftheunitbeforeinstallingthe

batteries.Amalfunctionmayoccurifthepowerison

whenthebatteryisinstalled.Ifamalfunctionoccurs,

restartthedevice.

1. Removebatterycoverbyslidingitinthedirectionof

thearrow.

2. Installtwo1.5VAAAbatteriesobservingpolarity

shownincompartment.

3. Replacethebatterycoveruntilitclicksshut.

Model: IN1022

Infrared Gun



-76to+1022°F/-60to+550°C

Operating Instructions

Mode Selection: E

Eâ á

MAX

MIN

DIF

AVG

HAL

LAL

A. Temperature Scale

ToselecttemperaturereadinginFahrenheit

orCelsius:

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. Pressthe°C/°Fbuttontochangethescale.

B. Backlit Display

Toturnthebacklitdisplayonandoff:

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. Pressandholdthetriggerandthenalsopress

theLOCKbuttontoturnthebacklitdisplayonand

off.TheBACKLIGHT icon( )appearsinthetop

portionofthedisplaywhenon.

C. Laser Light

Toturnthelaserlightonandoff:

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. Pressandholdthetriggerandthenalsopressthe

C°/F°buttontoturnthelaserlightonandoff.The

LASER icon( )appearsinthetopportionofthe

displaywhenon.

E. Lock Mode

Thisisparticularlyusefulforcontinuoustemperature

monitoringforupto60minutesandcanbeusedwith

Minimum,Maximum,DifferenceandAveragemodes.

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheLOCKbutton. appearsinthetopLOCK

portionofthedisplaywhenon.

3. Thethermometercontinuouslydisplaysthe

temperatureforupto60minutesorrestartsthe

timeifthetriggerispressedagain.

F. Infrared Thermometer

Note:TheIN1022isintendedforfoodserviceuse—donotusefor

safetyrelatedapplications.

1. Infrared Scanning

1. Distance:Spot = 12:1

Forexample,ifthesurface

areabeingmeasuredis

10"indiameter,thenthethermometermustbe

within120"ofthetargetforanaccuratereading.

2. Aimtheinfraredlensatthetargetandpress

thetriggertodisplaythesurfacetemperature.

Ifon,thelaserlightautomaticallyilluminates

thetarget.

3. The8-beamlaserlightformsacirclethatdenes

theareaofmeasure.Makesurethecircleis

smallerthantheareabeingmeasured.Ifthe

laserlightcircleislargerthantheareabeing

measured,thereadingwillincludeambient

temperaturesandmakethereadinginaccurate.

4. Measurementcontinuesaslongasthetriggeris

pressed.Thenewestreadingupdatesthedisplay.

5. Whenthetriggerisreleased, appearsonHOLD

thedisplayandthelastreadingremainsvisible

for60secondsbeforetheunitautomatically

powersoff.

2. Emissivity

Everythinggivesoffacertainamountofradiation.

Emissivityisthemeasureofthisthermalradiation.

Theinfraredthermometerissuppliedwithadefault

emissivityof0.95,whichstandardformostuses.

Theemissivityofthethermometercanbechanged

from0.1(10E)to1(100E).Only experienced

personnel should attempt to make changes.

Forinformationrelatingtotheemissivityofspecic

materials,pleasecontactCDN.

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonuntil appearsintheE

lowerleftcornerofthedisplay.Thecurrent

emissivitysettingappearsinthelowerright

cornerofthedisplay

3. PresstheMODEbuttonagaintoadjustthe

emissivityvaluein0.01(1E)incrementsinthe

EmissivityEditMode.âEáappearsinthelower

leftcornerofthedisplay.

4. Pressthe°C/°Fbuttontodecreasethe

emissivityvalue.PresstheLOCKbuttonto

increasetheemissivityvalue.Pressandholdfor

fastadvance.

5. PresstheMODEbuttonagaintoexitEmissivity

EditModeandenterMAXMode.

Note:Non-contactinfraredthermometersarenot

recommendedforuseinmeasuringthetemperatureof

shinyorpolishedmetals.

3. Maximum Mode

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonrepeatedlyuntilMAX

appearsinthelowerleftportionofthedisplay.

3. Aimtheinfraredlensatthetargetandpressthe

triggertodisplaythesurfacetemperature.

4. Measurementcontinuesaslongasthetrigger

ispressedorfor60minutesinLockMode.

TheMAXreadingdisplaysthehighest

temperatureamongmultipletargets.

4. Minimum Mode

1. PresstheMODEbuttonortriggertoturnthe

thermometeron.

2. PresstheMODEbuttonrepeatedlyuntilMIN

Distance:Spot(FOV)=12:1

Emissivity=0.1~1,Step.01

WaveLength=8µm-14µm

CAUTION: Never point the unit and/or laser towards

anyone’s eyes. Do not look directly into the laser

beams — permanent eye damage may result. Keep

away from children.

Produkt Specifikationer

Mærke:	CDN
Kategori:	Termometer
Model:	IN1022

Har du brug for hjælp?

Hvis du har brug for hjælp til CDN IN1022 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termometer CDN Manualer

15 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

13 Juni 2025

13 Juni 2025

CDN ProAccurate FG80 Manual

12 Juni 2025

CDN ProAccurate RFT1 Manual

12 Juni 2025

Termometer Manualer

Nyeste Termometer Manualer

Emos EGS0102 Manual

1 August 2025

Braun Sensian 3 BNT050 Manual

24 Juli 2025

Milwaukee Temp-Gun 2268-20 Manual

22 Juli 2025

Milwaukee Temp-Gun 2267-20 Manual

22 Juli 2025

Alecto BT5 Manual

21 Juli 2025

Steinberg SBS-IR-1300-16 Manual

19 Juli 2025

Comelec TN400 Manual

18 Juli 2025

Sauter JIT 200 Manual

17 Juli 2025

Laica TH1004 Manual

16 Juli 2025

Inkbird ITH-13-B Manual

16 Juli 2025