EXSYS EX-60114 Manual


Læs gratis den danske manual til EXSYS EX-60114 (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 17 anmeldelser. Har du et spørgsmål om EXSYS EX-60114, eller vil du spørge andre brugere om produktet?

Side 1/2
6 5 1
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
Anleitun
Vers. 1.1 / 11.05.23
E 6011
Die EX 60114 ist eine High Speed 2,5 Gigabit Ethernet PCI Express Karte. Sie ist mit vier - - -
externe RJ45 Anschlüsse ausgestattet. Die EX 60114 unterstützt alle PCI Express Slots von x4 - -
bis x16. Der serielle PCI Express Bus unterstützt optimal die Leistung des schnellen Realtek -
Chipsatz. Die EX 60114 gewährleistet so eine sichere Datenübertragung und exzellente Perfor--
4x RJ45 Anschluss
Kompatibilität: PCI Express p1-x4 bis x16 -
Betriebssysteme: Windows 98SE / ME Vista / 7 / 8.x / 10 / 11 / Server 20xx / / 2000 / XP /
Linux / Unix
Anschlüsse: 4x RJ45 2,5 Gigabit Ethernet Anschluss
Lieferumfang: 60114, Low Profile Bügel, Anleitung EX-
ANSCHLÜSSE & LED`S
RJ45 Anschluss:
Status LED´s:
RJ45 Anschluss
Pin Signal Pin Signal Pin Signal
1 BI_DA+ 4 BI_DC+ 7 BI_DD+
2 BI_DA 5 BI_DC 8 BI_DD - - -
3 BI_DB+ 6 BI_DB -
DRIVER INSTALLATION
Windows
After the hardware installation is completed, the operating system automatically detects the card
and installs it! If the drivers should not be installed automatically, you can download the drivers
from our EXSYS website (www.exsys.de or www.exsys.ch). Enter the article number in the
search field and select the appropriate article. Below under "Available Downloads" select the
driver download. Now select the folder of your operating system and install the drivers (see
figure). Follow the installation instructions and complete the installation. Important! Restart your
PC after the installation.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at the following new Networkadapter
entries:
If you see these or a similar informations the device is installed correctly.
HARDWARE INSTALLATION
Please note the following installation instructions. Because there are large differences between the
PCs, we can give you only a general installation instructions for the EX 60114. Please refer your -
computers reference manual whenever in doubt.
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer and
gently slide the cover off.
3. Locate an available PCI-Express expansion slot and insert the card. Make sure that the card
is plugged in correctly.
4. Then attach the card with a screw to the rear panel of the computer.
5. Gently replace your computers cover and the mounting screws.
DRIVER INSTALLATION
Linux / Unix
After the hardware installation is completed, the operating system automatically detects the card
and installs it! If the drivers should not be installed automatically, you can download the drivers
from our EXSYS website (www.exsys.de or www.exsys.ch). Enter the article number in the
search field and select the appropriate article. Below under "Available Downloads" select the
driver download. Now select the folder of your operating system and install the drivers (see
figure). Follow the installation instructions and complete the installation. Important! Restart your
PC after the installation.
ACT LAN DATA
LINK / Connected
Status LED´s pro Anschluss
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
Italy:
EXSYS Italia Srl
Via Belvedere, 45/B
I 22100 Como -
www.exsys.it


Produkt Specifikationer

Mærke: EXSYS
Kategori: Netværkskort/adapter
Model: EX-60114

Har du brug for hjælp?

Hvis du har brug for hjælp til EXSYS EX-60114 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter EXSYS Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer