SoundTube SB335 Manual

SoundTube Modtager SB335

Læs gratis den danske manual til SoundTube SB335 (8 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 19 anmeldelser. Har du et spørgsmål om SoundTube SB335, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

1.435.647.9555

800.647.TUBE

www.soundtube.com

Warning

SoundTube products must be installed by ofessional audio installer/contracto a pr r. For safety and for

optimum audio performance, installer must follow all di ections issued by Sound r Tube Entertainment .

Front Rear

Box Contents

1- Amplier

1- Bluetooth® antenna

1- IR receiver with 1m cord

1- 32 V, 3.75 A power supply

1- Six-pin Euroblock connectors

1- Three-pin Euroblock connectors

1- Mounting bracket

2- 2" Velcro strips

1- Double sided tape disk for IR receiver

The SB335 is a 2 or 3 channel amplier with Dolby Digital decoding. It is designed to be used with either an analog or digital input from a TV or other audio

source. With a digital input it automatically senses Dolby Digital and PCM and switches modes. The SB335 takes the input signal from an audio source, decodes

it and outputs either a 2 or 3 channel amplied signal to a sound bar or set of speakers. When set in the 2 channel mode it will take a stereo or multi-channel

signal and mix it down to 2 output channels (left and right). When set in the 3 channel mode it will take a stereo or multi-channel signal and mix it into 3 output

channels (left, right and center). In either mode there is a sub out option.

When used in place of internal TV speakers, change the TV’s audio setting to external speakers. Teach the SB335 the TV’s volume codes and it seamlessly

operates with no additional remotes.

Install Instructions For:

SB335