SoundTube STNet Switch II Manual

SoundTube Modtager STNet Switch II

Læs gratis den danske manual til SoundTube STNet Switch II (2 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om SoundTube STNet Switch II, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick Start GuideLogin from Web Browser

orseethereverseofthispagetologinwithInstallWizard

 Connect Switch to PC

Power up the switch and connect it via Ethernet LAN

cable to the Ethernet RJ45 connector on PC.

 Check the LED Status

Step 1: Power up the switch and connect it to the

PC using an Ethernet cable.

Step 2: If the port LED is blinking, the switch is

ready.

 Set Up IP Address of PC

Step 1: Press WinKey+R and type ”ncpa.cpl” command.

Step 2: Right-click on your local adapter and select Properties

Step 3: In the Local Area Connection Properties window

highlight Internet Protocol Version 4 (TCP/IPv4) then

click the Properties button.

Step 4: Select the radio button Use the following IP

address and enter in the IP for the PC (in between

192.168.1.2 and 192.168.1.254), Subnet Mask (e.g.

255.255.255.0), and Default Gateway that corresponds

with your network setup. Then enter your Preferred and

Alternate DNS server addresses.

Step5: Click OK to change the PC’s IP address.

 Login Page

If your PC is configured correctly, you will see the



 Enter the Factory Default IP

Run your Web browser on the PC, enter the factory

default IP address, so as to access the switch’s Web

interface.

Default IP 192.168.1.1

Subnet Mask 255.255.255.0

Login to the Switch

Enter the factory default username and

password in login page. Click “Login” to log

into the switch.

Default Username admin

No Factory Default Password

Quick Start GuideLogin with Install Wizard 

orseethereverseofthispagetologinfromWebBrowser

 Download Install Wizard

Download the Install Wizard via either of the three

following ways:

- http://www.channel-platform.com/INSTALL-WIZ

ARD/

- goo.gl/od0ZKr

- QR code below

 Check the LED Status

Step 1: Power up the switch and connect it to the

PC using an Ethernet cable.

Step 2: Check if the port LED is blinking which

means the switch is ready.

 Connect Switch to PC

Power up the switch and connect it via Ethernet LAN

cable to the Ethernet RJ45 connector on PC.

 Execute Install Wizard

Run the Install Wizard on your PC.

The Install Wizard will auto scan the switches on the

local network once it is executed.



Click Scan

Scan

Scan Scan Ic

IcIcon

onon to discover other

switches which are just being added

to the network.

 Configuration

Step 1: Select a switch you want to configure.

Step 2: Click the Configure Icon and login.

Step 3: Mark the “Management” as “Enable”.

Step 4: Configure basic features thru Install

Wizard (e.g. IP, NTP, Password, etc).

Default Username admin

No Factory Default Password

Step 3 is for Unmanaged+ Switch only.

Login to Web UI

Step 1: Select a switch you want to configure.

Step 2: Click the Configure Icon and login.

Step 3: Mark the “Management” as “Enable”.

Step 4: Click the Web GUI Icon and login.

Default Username admin

No Factory Default Password

Step 3 is for Unmanaged+ Switch only.

Produkt Specifikationer

Mærke:	SoundTube
Kategori:	Modtager
Model:	STNet Switch II

Har du brug for hjælp?

Hvis du har brug for hjælp til SoundTube STNet Switch II stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager SoundTube Manualer

SoundTube MCA10004t Manual

31 Januar 2025

SoundTube STNet Switch II Manual

28 Januar 2025

SoundTube WLL-RX1p-II Manual

28 Januar 2025

SoundTube WLL-TR-1p-II Manual

28 Januar 2025

SoundTube SA502 Manual

28 Januar 2025

SoundTube SB335 Manual

28 Januar 2025

SoundTube MA501T Manual

28 Januar 2025

SoundTube IPD-Hub 2 DSP Manual

28 Januar 2025

SoundTube MCA7004t Manual

28 Januar 2025

SoundTube SA202-II Manual

28 Januar 2025

Modtager Manualer

Nyeste Modtager Manualer

Perreaux Silhouette SXP2 Manual

13 September 2025

Perreaux Silhouette SX25i Manual

12 September 2025

Perreaux Silhouette SXV2 Manual

12 September 2025

Sony STR-DE635 Manual

12 September 2025

Perreaux Silhouette SX25 Manual

12 September 2025

Perreaux Audiant 80i Manual

12 September 2025

Samsung HW-C500 Manual

12 September 2025

Lab Gruppen CPA1202 Manual

12 September 2025

Sony STR-DH510 Manual

12 September 2025

Hartke KM200 Manual

12 September 2025