Pro1 T731WO Manual

Pro1 Termostat T731WO

Læs gratis den danske manual til Pro1 T731WO (5 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Pro1 T731WO, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

T731W(O)

Installation Manual

Pro1 Technologies

Toll Free : 888-776-1427

Web: www.pro1iaq.com

Hours of Operation: M-F 9AM - 6PM Eastern

Thermostat Application Guide

Description

Gas or Oil Heat

Electric Furnace

Heat Pump (No Aux. or Emergency Heat)

Heat Pump (With Electric Aux.)

Multi-Stage Systems

Heat Only Systems - Floor or Wall Furnace

Cool Only Systems

Millivolt

Yes

Power Type

Battery Power

Hardwire (Common Wire)

Hardwire (Common Wire) with

Battery Backup

Table of Contents

Installation Tips

Thermostat Quick Reference

Base Module Mounting Tips

Wiring

Technician Setup

Establishing Communication

Network Specications

Specications

Page

A trained, experienced

technician must install this

product.

Carefully read these

instructions. You could damage

this product or cause a

hazardous condition if you fail

to follow these instructions.

Una version en español de este

manual se puede descargar en

la pagina web de la compañia.

Rev. 2132

Mount Thermostat

Align the 4 tabs on the subbase

with corresponding slots on the

back of the thermostat, then push

gently until the thermostat snaps

in place.

Battery Installation

Battery installation is

optional if thermostat is

hardwired (R and C terminal

connected to 24V power).

Important:

High quality alkaline batteries are recommended.

Rechargeable batteries or low quality batteries

do not guarantee a 1-year life span.

Insert 2 AA

Alkaline batteries

(included). High

quality alkaline

batteries are

recommended.

Installation Tips

4-5

8-11

12-16

2-3

Installation Tips Thermostat Quick Reference

Getting to know your thermostat

Subbase Installation

The thermostat should be installed approximately 4 to 5 feet above the

oor. Select an area with average temperature and good air circulation.

• Close to hot or cold air ducts

• That are in direct sunlight

• With an outside wall behind

the thermostat

• In areas that do not require

conditioning

• Where there are dead spots

or drafts

(in corners or behind doors)

• Where there might be

concealed chimneys or

pipes

Wall Locations

Vertical Mount

Horizontal Mount

For vertical mount put one screw on the top

and one screw on the bottom.

For horizontal mount put one screw on the

left and one screw on the right.

All of our products are mercury free.

However, if the product you are

replacing contains mercury, dispose of

it properly. Your local waste

management authority can give you

instructions on recycling and proper

disposal.

Pick an installation location that is easy for

the user to access. The temperature of the

location should be representative of the

building.

Installation Tip

Mercury Notice

Do not install

thermostat in locations:

Failure to disconnect the power before

beginning to install this product can

cause electrical shock or equipment

damage.

Installation Tip:

Electrical Hazard

U.S. Registered Trademark. Patents pending

Heat Pump (With Gas Aux.)

Emergency Heat

Conventional Single Stage Furnace

Geothermal

High, Medium and Low Fan Speed

Yes

Located on the back of thermostat.

P.O. Box 3377

Springeld, MO 65808-3377

Glow in the Dark Light Button

Setpoint Buttons

LCD

System Button

Fan Button

17-18

6-7

Occupancy Sensor

(Occupancy Model Only)

Base Module - PTAC Installation

Side Mount:

Inside PTAC

Housing

Front Mount:

Inside PTAC

Housing

Base Module Mounting Tips

Range between the thermostat and the base module is up to 100 feet

with no obstructions and up to 50 feet through standard building

materials. To optimize the range try placing the base module with no

metal between it and the thermostat.

The base module is designed to be mounted behind the front grille

of a packaged terminal air conditioner (PTAC). Refer to the PTAC

manufacturer’s manual for instruction to remove the front grille.

Check clearance to ensure the t of front grille after base module

installation. See below for a few location recommendations.

The low battery indicator is displayed when the AA battery power is low. If the user

fails to replace the battery within 21 days, the screen will only show the low battery

indicator but maintain all functionality. If the user fails to replace the batteries after

an additional 21 days (days 22-42 since rst “low battery” display) the setpoints will

change to 55˚F (Heating) and 85˚F (Cooling). If the user adjusts the setpoint away from

either of these, it will hold for 4 hours then return to either 55˚F or 85˚F. After day 63

the batteries must be replaced immediately to avoid freezing or overheating because

the thermostat will shut the unit o until the batteries are changed.

Important

Ambient Temperature:

Displays the current room temperature

Energy Ecient Globe:

Indicates you are making an energy ecient set at

temperature.

Staging Indicaators:

If these or the fan indicators are ashing, it means that the system is in a delay of some

type (compressor delay, cooling fan delay, or staging delay) or a pending change.

Set At Temperature:

Displays the selected desired room temperature.

Wireless Symbol: Indicates you have a wireless connection.

Heat

Cool

Auto

On LHM

Set At

COOL ON

HEAT ON

FAN ON

STAGE 1+2

Heat

Cool

Auto

On LHM

Set At

COOL ON

HEAT ON

FAN ON

STAGE 1+2

Thermostat Quick Reference

Low Battery Indicator: Replace batteries when this indicator

appears.

Base Module Mounting Tips

Wiring

When Working With A Vertical Unit

1. Do not mount Module inside the cabinet of the unit, or in a

metal enclosure.

2. Mount on the outside of the unit to maximize wireless

communication.

When Working With A Metal Sleeve Cabinet, Room Cabinet,

or PTAC Cover

1. If cabinet has open bottom, mount the module just inside the

cabinet as close to the open bottom as possible without placing it in

danger of being bumped or touched by furnishings, vaccum, etc.

2. Another good module location would be on the underside of the

top of the cabinet or cover. Directly behind the open Louver/Grill.

Front Panel

Chasis

Sleeve Cabinet

Rough-In

Wall Opening

Caution:

Electrical Hazard

All components of the

control system and the

thermostat installation must

conform to Class II circuits

per the NEC Code.

Warning:

Do not overtighten terminal

block screws, as this can

damage the terminal block.

A damaged terminal block

can keep the thermostat

from tting on the subbase

correctly or cause system

operation issues.

Installation Tip

Max Torque = 6in-lbs.

Wiring

If you are replacing a thermostat,

make note of the terminal

connections on the thermostat

that is being replaced. In some

cases the wiring connections will

not be color coded. For example,

the green wire may not be

connected to the G terminal.

Loosen the terminal block

screws. Insert wires then

retighten terminal block screws.

Place nonammable insulation

into wall opening to prevent

drafts.

Terminal Designations

Failure to disconnect the power

before beginning to install this

product can cause electrical

shock or equipment damage.

Heat Pump System

1 HEAT 1 COOL / 2 HEAT 1 COOL

Conventional System

1 HEAT 1 COOL

Transformer Power

Transformer Common

Changeover Valve

Energized in HEAT

Fan Relay, Low

Changeover Valve

Energized in COOL

Second Stage of HEAT

First Stage of HEAT and COOL

Transformer Power

Transformer Common

Fan Relay, Low

First Stage of HEAT

First Stage of COOL

N/A

Fan Relay, High Fan Relay, High

Produkt Specifikationer

Mærke:	Pro1
Kategori:	Termostat
Model:	T731WO

Har du brug for hjælp?

Hvis du har brug for hjælp til Pro1 T731WO stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termostat Pro1 Manualer

21 August 2025

20 August 2025

20 August 2025

20 August 2025

20 August 2025

20 August 2025

20 August 2025

20 August 2025

20 August 2025

20 August 2025

Termostat Manualer

Nyeste Termostat Manualer

Bticino HS4451 Manual

7 Oktober 2025

Bticino N4451 Manual

7 Oktober 2025

Bticino L4451 Manual

7 Oktober 2025

Bticino AM5721 Manual

6 Oktober 2025

Bticino L4441FH Manual

6 Oktober 2025

Bticino Living 4477 Manual

6 Oktober 2025

Bticino HC4451 Manual

6 Oktober 2025

Emerson ST75 Manual

1 Oktober 2025

Homematic IP HMIP-eTRV Manual

30 September 2025

Xavax UT 200 Manual

29 September 2025