Smart-AVI XT-TX400 Manual

Smart-AVI AV forlænger XT-TX400

Læs gratis den danske manual til Smart-AVI XT-TX400 (2 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Smart-AVI XT-TX400, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Notice

The information contained in this document is

subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and fitness for any particular

purpose.

Smart-AVI will not be liable for errors contained herein

or for incidental or consequential damages in

connection with the furnishing, performance or use

of this material.

No part of this document may be photocopied,

reproduced or translated into another language with

out prior written consent from Smart-AVI.

For the complete manual, visit www.smartavi.com.

Use a single CAT5 cable to broadcast

high resolution SXGA, Stereo Audio

and RS232 up to 4 stations up to

1000ft away.

XT-400

www.smartavi.com

User Manual

2840 N. Naomi Ave.

Burbank, California 91504

Phone: (818) 565-0011

Facsimile: (818) 565-0020

Technical Specifications

3MART!UDIO6IDEO)NTEGRATION

SNOITACIFICEPS004-TX SNOITACIFICEPS004-TX SNOITACIFICEPS004-TX SNOITACIFICEPS004-TX SNOITACIFICEPS004-TX

ataDAGV ataDAGV ataDAGV ataDAGV ataDAGV

tamroF SBVC,C/Y,VUY,BsGR,VHBGR

noituloseR 0021x0091otpU

)AGXS,AGX,AGVS,AGV

epytrotcennoC tekcos51DH

oiduA oiduA oiduA oiduA oiduA

epyTlangiS decnalabnuoeretS

rotcennoC tekcoskcajmm5.3

232SR 232SR 232SR 232SR 232SR

M9BD

.dnG,DXR,DXT

spb0069

rewoP rewoP rewoP rewoP rewoP

stnemeriuqeR A5.@CDV5

rotcennoC )ev+retnec(kcajCDmm1.2

lacisyhP lacisyhP lacisyhP lacisyhP lacisyhP

snoisnemiD )sgephtiw1.3(mc7.2x8.11x22

thgieW gk63.rosbl8.

Sending an RS232 command to remoteSending an RS232 command to remoteSending an RS232 command to remoteSending an RS232 command to remoteSending an RS232 command to remote

monitormonitormonitormonitormonitor

In order to send a command to a remote monitor, you

will need to use The following query at 9600 baud

rate;

 After sending this query, any command sent from

the PC will go directly to monitor 1

 To send a command to monitor 2 replace "M1"

with "M2" etc...

 To send the same command to all monitors ( but

only monitor 1 will answer) Use the following

command;

<CR> = Carriage return

In Out In OutRS23 2 Out 1-4

Introduction

The XT400 range of products allows the extension of

a wide range of video and audio formats and RS232

up to 4 locations using Category 5 Unshielded

Twisted Pair (UTP) cables.

With RS232 communication support the XT400

allows users to send commands to single or

multiples devices. This allows the user to change

volume, channel or turn on/off the remote LCD TV.

Features

 Supports Dual Screens.

 Uses easy to install, inexpensive CAT-5/5e/6/7/8.

 Each output reaches up to 1,000 feet (300 m).

 Supports high resolution video up to 1900x1200

 HDTV Compatible (720p, 1080i,1080p)

 300 MHz Bandwidth.

 Sends high-resolution VGA, Stereo Audio signals,

RS232 or IR from one source to 4 locations.

 Compatible with VGA, XGA, Sun, MAC and SGI

 Sync Format / Polarity Preservation.

 Compatible with Line Level Stereo Audio Signals.

 High ground loop immunity.

 Built-in power surge and transient protection.

 Designated trimmer in the remote unit to

compensate for cable length.

 Compact Metal Case Enclosure.

 External power supply.

 RS-232c Communication support to single or

multiple Displays.

 IR command to single or multiple Displays.

What’s in the box?

XT400XT400

XT400

Please check the package contents before installing.

Installation Diagram

XT400 Transmitter Installation Diagram XT400 Receiver Installation Diagram

Adjusting and Tuning the SignalAdjusting and Tuning the SignalAdjusting and Tuning the SignalAdjusting and Tuning the SignalAdjusting and Tuning the Signal

In order to fine tune the signal, adjust the individual

dials one at a time starting with GREEN, then BLUE,

and lastly RED. As you turn the dials you will notice the

colors slightly change as you increase or decrease the

strength. All dials should be around the same distance.

Preparing & Connecting System CAT5 CablePreparing & Connecting System CAT5 Cable

Preparing & Connecting System CAT5 CablePreparing & Connecting System CAT5 CablePreparing & Connecting System CAT5 Cable

Following is the wiring standard for terminating CAT 5

cable using RJ-45 connector:

Pair 1 Pins 1 & 2

Pair 2 Pins 3 & 6

Pair 3 Pins 4 & 5

Pair 4 Pins 7 & 8

C o n ne c to r s :C o n ne c to r s :

C o n ne c to r s : RJ-45

C a p a c i t a n c e:C a p a c i t a n c e:

C apac i t anc e : 14 pf/ft (46.2 pf/m)

Conductor Gauge:Conductor Gauge:

Conductor Gauge: 24 AWG

I m p e d a n c e :I m p e d a n c e :

I m p e d a n c e : 100 +/- 15 ohms

4 - Pair

Connecting The TransmitterConnecting The Transmitter

Connecting The Transmitter

1. Connect the output of the computer video card to the

video input of the transmitter using the included male

to male video cable.

2. Connect the output of the computer audio card to the

audio input of the transmitter using 3.5mm audio

male to male audio cable.

3. Connect local monitor to the VGA out of the

transmitter.

4. Connect external speakers to the transmitter’s audio

out (Standard 3.5mm stereo miniplug).

5. In the back of the unit connect the CAT5 cable that

will connect to the receiver (XT400-RX).

*NOTE: You can not use RS232 and IR at the same time.

Connecting The ReceiverConnecting The ReceiverConnecting The ReceiverConnecting The ReceiverConnecting The Receiver

1. Connect CAT5 cable (coming from the transmitter) to

the back of the receiver.

2. Connect 1-4 display monitors to the VGA out

connectors on the front of the receiver.

3. Connect 1-4 sets of external speakers to the audio

output connections on the front of the unit.

(Standard 3.5mm stereo Miniplug)

stnetnoCegakcaP004TX stnetnoCegakcaP004TX stnetnoCegakcaP004TX stnetnoCegakcaP004TX stnetnoCegakcaP004TX

ytQ ytQ ytQ ytQ ytQ smetI smetI smetI smetI smetI .oNtraP .oNtraP .oNtraP .oNtraP .oNtraP

1 tinurettimsnarT004TX XT-004TX

1 ylppusrewopcdtlov5 SU-A1D5-SP

1 )tf6(elbacAGVelamotelam51DDH 60-MMAGV-CC

lanoitpO lanoitpO lanoitpO lanoitpO lanoitpO

1 elbacgulpinimoeretsmm5.3oiduA 60-MMAMM-CC

1 tinurevieceRORPTX XR-ORPTX

1 revieceREYERI EYE-MS

1 rettimERI DEL-MS

1 elbac232SR'6 60-232SRCC

RS232

Audio In

VGA In

VGA Out

4 lines

of CAT5

IR Emmiter

Audio Out

5V DC

XT400

XTPRO-RX

VGA

Audio Audio

Produkt Specifikationer

Mærke:	Smart-AVI
Kategori:	AV forlænger
Model:	XT-TX400

Har du brug for hjælp?

Hvis du har brug for hjælp til Smart-AVI XT-TX400 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

AV forlænger Smart-AVI Manualer

Smart-AVI HFX Manual

9 Januar 2025

Smart-AVI HFX-KM Manual

9 Januar 2025

Smart-AVI FDX-AVPRO Manual

1 Januar 2025

Smart-AVI HDX-POE Manual

1 Januar 2025

Smart-AVI RKT16-HDX100 Manual

1 Januar 2025

Smart-AVI HDX-LX Manual

1 Januar 2025

Smart-AVI SFXPRO-4P Manual

1 Januar 2025

Smart-AVI XTPRO Manual

1 Januar 2025

Smart-AVI SFXPRO-2P Manual

1 Januar 2025

Smart-AVI FVX-3000-Pro Manual

1 Januar 2025

AV forlænger Manualer

Nyeste AV forlænger Manualer

Kramer 690R Manual

1 August 2025

Tripp Lite B132-100-1 Manual

31 Juli 2025

Tripp Lite B126-1A1SR Manual

31 Juli 2025

Tripp Lite B127U-002-PDPD2 Manual

31 Juli 2025

Tripp Lite B140-004 Manual

31 Juli 2025

Tripp Lite B127U-002-PHPH2 Manual

31 Juli 2025

Tripp Lite B126-2A0 Manual

31 Juli 2025

Tripp Lite B126-1A1-PLHD Manual

31 Juli 2025

Tripp Lite B013-330 Manual

31 Juli 2025

Tripp Lite B127U-111-PHPH Manual

30 Juli 2025