Theben TC 649 Manual

Theben Ikke kategoriseret TC 649

Læs gratis den danske manual til Theben TC 649 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Theben TC 649, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
1
Operating instructions
307389 01
STB Service Tool software for
the control box
1. Start-up
LIn order to start up the control box, you need the STB Ser-
vice Tool software. It can be downloaded from the Theben
https://www.theben.de/tc-649/
LPlease note that you have to load the IP addresses, which
you receive from your operator, into the device by using the
STB Service Tool.
LIf there are any problems when connecting the service tool
and the device, please check the proxy connection.
In order to start up and congure the control box
Connect the PC with the "Service" interface by using the
LAN cable
Press Connect
▻A connection with the control box will be established.
The info window shows all relevant data of the control
box, including date/time.
The following functions can be used to start up the control
box.
LYou have to enter the following settings, which you receive
from your operator, into the software.
Server/notifier
IP address the device should report to.
IPv4 address type
STATIC: IP setting of the device will be made manually.
DHCP: IP setting of the device will be made automatically.
IPv4 address/ IPv4 subnet
IP address and subnet mask of the device.
IPv4 gateway
IP address of the gateway.
Use NTP
The device obtains the time from an NTP server.
NTP server
IP address of the NTP server.
C1/C2/C3/C4
C1–C4 are not active until a program start/a connection with
the device has been established.
C1/C3 red = relay is on
C2/C4 grey = relay is off
Send
The network settings are sent to the control box.
▻They are reported back by the control box and dis-
played in the info window of the software.
With , you can select whether the current Set system time
time should be sent to the device.
Reset
All proles and switch programmes will be deleted and the
relays will be reset.
2. Transmit data to operator
Once you have started up the device, you have to transmit
the serial number, location, street, and channel assignment to
your operator.
3. Contact
Service address
Theben AG
Hohenbergstr. 32
72401 Haigerloch
GERMANY
Phone +49 7474 692-0
Fax +49 7474 692-150
Hotline
Phone +49 7474 692-369
hotline@theben.de
www.theben.de
1
Installation and operating
instructions
307360 01
TC 649 6490330
Control box LAN
1. Basic safety information
Danger of death through electric shock or fire!
Installation should only be carried out by a qualied
electrician!
WARNING
•
The device is designed for installation on DIN top hat rails (in
accordance with IEC 60715)
•
It complies with product standard EN 60669-2-1
Do not operate the device outside the specied technical data
!
The device must be installed in an enclosed switchgear cabinet
made of metal or an appropriate re-resistant material!
!
After proper installation, the housing component under the
cover - in the sealed area - must not be accessible!
2. Proper use
Control box TC 649 is an annual time switch with astronomical
function, which can be controlled and updated via LAN and managed
centrally from a computer. The control box is used for lighting and
ventilation.
!
Do not use on safety devices, e.g. escape route doors, re
safety equipment, etc.
Disposal
For an environmentally appropriate disposal, send the device back
to the owner
3. Installation and connection
Installing TC 649
click
Connecting TC 649
Connecting the power supply
Strip cable to 8 mm (max. 9 mm)
Insert the line into the terminal and fasten it
(screw terminal, item no. 9070966)
Plug terminal into power supply socket
Connect to power supply
▻ During the start of the operating system, all LEDs are ashing.
After approx. 150 s the start process is completed and the
power LED (PWR/TLS) ashes.
Wiring diagram
L
L
N
L
L L
N
L L
L
N
LSwitch the load with a contactor.
!
If a load is switched directly, secure the device with a circuit
breaker of 6 A.
4. Device description
Connections
Service interface
Connection to LAN
network
Power supply
socket (230 V)
Voltage

Produkt Specifikationer

Mærke: Theben
Kategori: Ikke kategoriseret
Model: TC 649

Har du brug for hjælp?

Hvis du har brug for hjælp til Theben TC 649 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Theben Manualer

Theben

Theben LUXORliving T4 S RF Manual

4 August 2025
Theben

Theben TA 8 S KNX Manual

3 August 2025
Theben

Theben BM 12 T KNX Manual

3 August 2025
Theben

Theben LUXORliving D1 DALI Manual

3 August 2025
Theben

Theben LUXORliving D1 S RF Manual

3 August 2025
Theben

Theben PlanoSpot 360 DALI-2 S DE Manual

3 August 2025
Theben

Theben RM 8 T KNX Manual

3 August 2025
Theben

Theben LUXORliving D1 DALI S RF Manual

3 August 2025
Theben

Theben LUXORliving J1 Manual

3 August 2025
Theben

Theben JU 1 KNX Manual

2 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

SereneLife

SereneLife SLCPTBPVC12 Manual

19 Oktober 2025
ResMed

ResMed Narval CC Manual

19 Oktober 2025
Dormakaba

Dormakaba CenTran 4 Manual

19 Oktober 2025
ResMed

ResMed AirFit N10 Manual

19 Oktober 2025
CRUX

CRUX SWRCR-59LV Manual

19 Oktober 2025
Dormakaba

Dormakaba Crane S1 Manual

19 Oktober 2025
Shape

Shape BP8000 Manual

19 Oktober 2025
Shape

Shape ALPKIT Manual

19 Oktober 2025
Shape

Shape COMPOFIC Manual

19 Oktober 2025
ResMed

ResMed AirFit F10 Manual

18 Oktober 2025