Xantech DL85 Manual

Xantech Modtager DL85

Læs gratis den danske manual til Xantech DL85 (3 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Xantech DL85, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
INSTALLATION INSTRUCTIONS
DL85
Dinky Link™ Surface Mount
Plasma\LCD\LED\CFL Friendly
IR Receiver
1
DESCRIPTION
These small IR receivers have been designed for mounting in very small
spaces. They may be mounted under shelf edges, cabinet ledges, in wall
speakers, etc. – anywhere an inconspicuous appearance is desired. The high
sensitivity of these receivers allows placement behind speaker grilles and still
receive IR commands up to 80 feet away*.
FEATURES
• Wire channel for clean installation.
• System testing red-talk-back LED.
• Includes 3-Terminal Block for easy extension to remote room locations.
SPECIFICATIONS
• Infrared carrier frequency bandwidth: 30 - 60 kHz.
• Reception range: Up to 80 feet.*
• Reception angle: +/- 60 degrees.
• Cable requirements: See “INSTALLATION” below.
• Max. Transmission length: 1 mile using 18 gauge wire.
• Maximum current output: 100mA.
• Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
• Dimensions: 2.55” x 0.55” x 0.35” (65mm x 14mm x 9mm).
• Power requirements: +12VDC, 10mA.
* Depending on remote control output strength and ambient conditions.
MOUNTING
The IR receiver can be mounted to any at surface, using the two-sided
adhesive tape supplied. Two screws are included for mounting the 3-terminal
block provided with the IR receiver.
An additional feature is a wire channel on the rear of the surface mount IR
receiver. This will give the installer the ability to provide clean wire dressing in
any direction.
2
INSTALLATION
IR RECEIVER CABLE WIRING
REMOTE ROOM APPLICATION
One application is to locate the IR receiver in a remote room. This will give the
end-user the ability to control audio/video equipment from a location where
the remote control no longer has the ability of direct line-of-sight.
The IR receiver will need the 3.5mm stereo type mini plug removed to extend
the wire run to the connecting block. A 3-terminal block is supplied to connect
the IR receiver to the connecting block with a 3-conductor inter-room cable in
between. The 3-conductor inter-room cable (24 gauge up to 200’, 22 gauge
up to 600’, 20 gauge up to 2000’, 18 gauge up to 5000’), is run to the main
room.
D
L Series
IR Receiver
White
Stripe
3-Terminal Block
3-Conductor
Wire to Controlled
Equipment
7-Foot Ribbon Cable
with Mini Plug removed
OUT
+12V
GND
DL Series
IR Receiver
Red (or white)
Stripe
To 120 V AC
(unswitched)
781ERGPS
789-44
Connecting Block
REMOTE ROOM
MAIN ROOM
Hand Hel d
Remote
3-Terminal Block (supplied )
3-Conductor
Inter-room Cable
(unshielded OK)
7' Ribbon Cable
A/V Receiver
DVD
IR Photodiode
Red
Talkback LED
Satellite Receiver
283D Emitter
12VD C
+12 VDC
GND
STATUS
IR IN
EMITTERS
IR
RCVR
789-44
CONNECTING BLOCK
®
IR OUT
+12V
GND
283D Emitter
283D Emitter
3
Input connections must be made as illustrated. To extend the emitter wires to
a more distant location, you may splice in 2-conductor wire, in the wire
gauges mentioned before, as needed.
While it is possible to make wired connections without the connecting block, it
is not recommended. The connecting block reduces installation time, helps to
eliminate errors, allows easy troubleshooting and permits easy system
upgrades later, if needed.
LOCAL SYSTEM APPLICATION
Another application is to locate the IR receiver in a central location, such as
the TV, video screen and/or a speaker. The audio/video equipment can then
be hidden inside a cabinet or located away from the front of a room. This will
give the end-user the ability to direct a remote control to one central location
and not have to worry about aiming to the respective device to be controlled.
The IR receiver is in close proximity to the audio/video equipment, no wiring
extension should be required so long as the connecting block is within reach
of the 7-foot cable. The 3.5mm stereo type mini plug is connected to the “IR
RCVR” jack on the Xantech Connecting Block.
PLACEMENT
The IR receiver should be located so that it is not directly facing a light source
such as lamps or displays (standard, LCD, and Plasma). When mounted near
a display, it should be flush to the display and away from light reections that
may occur.
To 120 V AC
(unswitched)
Emitter
Emitter
7 Foot Ribbon
Cable with Quick
Connect Mini Plug
Controlled Equipment
(mounted behind
closed cabinet doors)
(mounted on or
near cabinet in an
inconspicuous
location).
Emitter
Emitter
Satellite Receiver
VCR
AV Receiver
CD Changer
Cassette Deck
DL Series
IR Receiver
Hand Hel
d
Remote
IR Photodiode
Red
Talkback LED
791-44
Amplified
Connecting Block
+ 12 VD C
GN D
EMITTERS
12 VDC
HIGH
IR
OUT
STAT US
IR I N
IR
RCVR
791- 44
AMPLIFIE D
CONNECTING BLOCK
®
781ERGPS
Emitter

Produkt Specifikationer

Mærke: Xantech
Kategori: Modtager
Model: DL85

Har du brug for hjælp?

Hvis du har brug for hjælp til Xantech DL85 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Xantech Manualer

Xantech

Xantech DL85 Manual

23 Juni 2025
Xantech

Xantech ML95K Manual

29 August 2024
Xantech

Xantech Micro Link ML85 Manual

28 August 2024
Xantech

Xantech Dinky Link 48095D Manual

26 August 2024
Xantech

Xantech Dinky Link 48085DB Manual

26 August 2024
Xantech

Xantech Hidden Link 29195D Manual

21 Juli 2024
Xantech

Xantech Hidden Link 29185D Manual

21 Juli 2024
Xantech

Xantech DL95K Manual

16 December 2022
Xantech

Xantech HL95K Manual

16 December 2022

Modtager Manualer

Nyeste Modtager Manualer

AIYIMA

AIYIMA D03 Manual

23 Juni 2025
Nobsound

Nobsound NS-01G PRO Manual

23 Juni 2025
AIYIMA

AIYIMA A01 Pro Manual

23 Juni 2025
TROND

TROND BT-DUO X Manual

23 Juni 2025
AIYIMA

AIYIMA T8 Manual

23 Juni 2025
AIYIMA

AIYIMA D05 Manual

23 Juni 2025
MANAYO

MANAYO PM5 Manual

23 Juni 2025
Infinity

Infinity Reference 4555A Manual

22 Juni 2025
Parasound

Parasound JCM 250 Manual

21 Juni 2025
Wadia

Wadia 151PowerDAC mini Manual

21 Juni 2025